Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for D3FY SPORTS Conqu3st
-
Page 3: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY GUIDELINES ....................4 CRITICAL SAFTY INFORMATION .....................5 IMPORTANT CO2 & HPA AIR TANK SAFETY GUIDELINES ............6 GETTING STARTED ..........................7 MAINTAINING YOUR CONQU3ST PAINTBALL MARKER ............8-10 TROUBLESHOOTING ...........................10 NOTES ..............................11 CONQU3ST PARTS LIST ........................12 SCHEMATIC ............................13 WARRANTY ............................14... -
Page 4: Important Safety Guidelines
Enforcement. •The CONQU3ST paintball marker is not a toy. Misuse may cause serious injury or death. • Always treat the CONQU3ST marker as if it were loaded and able to fire. •Please read, understand and follow the instructions in the CONQU3ST Owner’s Manual. -
Page 5: Critical Safty Information
•D3FY SPORTS will not be held liable for injuries or death sustained when failing to follow the Safety Guidelines. •If you read these instructions and do not fully understand them, or are unsure of your ability to make necessary adjustments properly, call D3FY SPORTS or your local pro shop for help. -
Page 6: Important Co2 & Hpa Air Tank Safety Guidelines
IMPORTANT CO2 & HPA AIR TANK SAFETY GUIDELINES IMPORTANT C02 & HPA AIR TANK SAFETY GUIDELINES be retested periodically. •Only use Co2 or HPA Air Tanks that are made for the sport of • Improper use, filling, storage, or disposal of all air tanks may paintball result in property damage, personal injury, and/or death. -
Page 7: Getting Started
“PUSH SAFE” on the trigger frame. when not in use. Caution: The CONQU3ST is now live and ready to fire. 15.Push the safety button to the “SAFE” position. GETTING STARTED... -
Page 8: Maintaining Your Conqu3St Paintball Marker
MAINTAINING YOUR CONQU3ST PAINTBALL MARKER MAINTAINING YOUR CONQU3ST PAINTBALL MARKER the paintball marker will not function properly. With the Bolt Cocking Pin properly PART # and Description installed to the Striker, you (X-10-B, X-10-OD) Receiver should now push the Safety (I-19) Delrin Bolt button to the “Fire”... - Page 9 Cocking Pin with the Striker hole, and push down on the the air source is detached before attempting any maintenance Pin to lock it in place. Note: If the Striker hole is not aligned and/or repairs. upright, the Bolt Cocking Pin will not lock correctly. MAINTAINING YOUR CONQU3ST PAINTBALL MARKER...
-
Page 10: Troubleshooting
TROUBLESHOOTING 1.Remove the Barrel (X-02) by unscrewing it counter-clockwise. 1.Air tank is empty, or the pressure in the tank is too low. Solution: Refill the tank. 2.Remove Front Plug Screw (S-53) using a 3mm Allen key. This screw holds the Front Plug (X- 04) onto the Receiver. 2.Internals may be dirty and/or full of paint. -
Page 11: Notes
Valve Body. NOTES: 4.Air leaking from the hose fitting on the Receiver. Solution: Remove hose and use thread sealer (Blue Loctite) on hose thread. 5.Air leaking from the hose fitting on the ASA. Solution: Replaced the Hose O-ring. 6.Air leaking from the ASA relief hole. Solution: Replaced tank valve O-ring. -
Page 12: Conqu3St Parts List
CONQU3ST PARTS LIST CONQU3ST PARTS LIST LIST PART# DESCRIPTION LIST PART# DESCRIPTION X-01 Barrel Safety Plug X-28C Trigger Frame (Composite) X-29 Striker Plug X-02-B/OD 12” Barrel O-30 Velocity/Spring Guide O-ring O-005 Barrel O-ring I-31 Velocity/Spring Guide X-04 Front Plug X-32... -
Page 13: Schematic
SCHEMATIC... -
Page 14: Warranty
Normal wear and tear is not covered 6.Warranty is void when non-OEM upgrade/replacement parts under warranty. are installed. D3fy Sports will not be held responsible for the compatibility issues between various manufactures. REGISTER YOUR MARKER AT WWW.D3FYSPORTS.COM 7.If you don’t have your receipt or have not registered your...
Need help?
Do you have a question about the Conqu3st and is the answer not in the manual?
Questions and answers