Advertisement
OPERATING INSTRUCTIONS
1. Locate the DC socket on the backside on the lamps arm near where
it attaches to the heavy weighted base and insert the AC adaptor
plug.
2. Plug the other end of the AC adaptor into a suitable wall power
outlet.
3. Touch the chrome electronic membrane touch sensor power switch
at the base of the arm to power the lamp on and off.
4. Adjust lamp's flex arm to optimally position the light angle.
5. Locate the USB socket power port on the side of the lamps flex arm
near where it attaches to the heavy weighted base and as needed
plug in an appropriate USB power cord to charge Smartphone's,
iPod's, etc.
GemOro Products
6
Advertisement
