Page 1
Chile - Assembly Instructions - Please keep for future reference 482/1254 501/5856 Dimensions Width - 97.1cm Depth - 197.6cm Height - 112.8cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, c a l l t h e Customer Helpline: 03456 400 800 Issue 1 - 05/10/15...
Page 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly Check you have all the This product has been produced We do not from natural timber; you may recommend the components and tools listed on pages 2 and 3. notice some variation in the grain use of power and colour of different component...
Page 3
Components - Panels Please check you have all the panels listed below Headboard (112.8 x 97.1cm) Footboard (61.8 x 97.1cm) Side rail x 2 (190.0 x 14.0cm) Slats x 12 (91 x 7.0cm)
Page 4
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 03456 400 800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. Wooden dowel x 4 4 x 35mm Screw x 24 Headless bolt 1/4 x 75mm x 4...
Page 5
Assembly Instructions Step1 Screw headless bols into footboard Step2 Insert dowels into the side rails...
Page 6
Assembly Instructions Step3 Assembling side rails. Important: Two people are required for an easier assembly. With help, fit one side to the headboard Insert half moon nuts as shown, then fix parts and allen key using bolts Repeat step 5 for the other Repeat step 5 for the other side rail.
Page 7
Assembly Instructions Step5 Assembling slats Please fix the first slat at the end of the rail and work towards the middle of the bed using the spacer as shown to ensure correct spacing. Fix slats in one side first, then fix them in the other side by pushing the rail against the slats if necessary.