Advertisement
Quick Links
MODEL: WMCS-400
CLIMBING STAND
Always Wear a Safety Harness with this Product
Practice Using at Ground Level
Weight Limit: 300 lbs.
Tree Size: 9"-18" diameter
Warning
Every year serious injury and even death occurs from hunting related falls. To ensure your safety, please COMPLETELY read and follow this safety
manual and ALL warning labels BEFORE assembling, installing or utilizing this product.
DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY WARNINGS AND INSTRUCTIONS. IF YOU HAVE QUESTIONS, ARE
UNSURE ABOUT ANY INFORMATION OR NEED ADDITIONAL INFORMATION CONCERNING YOUR PRODUCT, CONTACT OUR CUSTOMER SERVICE
DEPARTMENT AT 1-866-972-6168 OR VISIT WWW.TREESTANDCUSTOMERSERVICE.COM. KEEP AND MAINTAIN THIS SAFETY AND INSTRUCTION
MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE.
Distributed by Tahsin Industrial Corp USA 685 Route 10 East, Randolph, NJ 07869
Instruction and Safety Manual
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
©2013 (rev. 12/12)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Primal Vantage WMCS-400
Summary of Contents for Primal Vantage WMCS-400
- Page 1 MODEL: WMCS-400 CLIMBING STAND Always Wear a Safety Harness with this Product Practice Using at Ground Level Weight Limit: 300 lbs. Tree Size: 9”-18” diameter Instruction and Safety Manual Warning Every year serious injury and even death occurs from hunting related falls. To ensure your safety, please COMPLETELY read and follow this safety manual and ALL warning labels BEFORE assembling, installing or utilizing this product.
- Page 2 TREESTAND SAFETY WARNINGS Please read the following instruction manual and warnings labels completely before utilizing this product. Failure to understand and execute the instructions and warnings may result in serious injury or death. In the event of an accident, have a plan for rescue, including the use of devices that may be easily reached while suspended.
- Page 3 TREESTAND SAFETY WARNINGS NEVER adjust your stand while in use. ALWAYS ensure that you and your treestand are safely secured to a healthy tree. Your tree stand MUST be attached tightly to the tree and secured in place. If the stand is not secure, it may shift while in use, resulting in serious injury or death. DO NOT leave your treestand outside since weather and animals may cause damage.
- Page 4 • We recommend replacing all hardware/cables/nuts/bolts/clips on your tree stand every two (2) years or sooner if inspection finds it necessary. Use only Primal Vantage approved replacement straps and parts. Use of any other straps or parts, will be viewed as a modification to the product. Any modification will void the warranties and relieve Primal Vantage from all liabilities.
-
Page 5: Parts List
Part # CB-100 1 Harness Part # 2013 75 2 M12x75mm Bolt Rope (1) Part # 1875 Climber Buckle Strap (2) ©2013 (rev. 12/12) Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869 CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM... - Page 6 MODEL: WMCS-400 ASSEMBLY INSTRUCTIONS PAGE 1 CLIMBING STAND Frame Support 1. Insert 1-M12x75mm bolt through the bottom of Foot Platform. 2. Lift railing and insert frame support through attached bolt 3. Thread T-knob on bolt. 4. Insert 1-M10 Quickclip through frame support and welded tab to secure frame in place.
- Page 7 MODEL: WMCS-400 ASSEMBLY INSTRUCTIONS PAGE 2 CLIMBING STAND 7. Attach Seat Cushion to the frame of Seat Platform (See Seat Cushion Instructions.) Attach Shooting Rail Cover to the Shooting Rail. 9. Insert one end of Cable into Foot Platform Rail. Insert 1 - M12 Quickclip into the rail 8.
- Page 8 MODEL: WMCS-400 ASSEMBLY INSTRUCTIONS PAGE 3 ALUMINUM CLIMBER 10. Wrap the cable around the back of the tree and insert the other end of Cable into the opposite railing of the Foot Platform. Secure with 1-M12 Quickclip . Install the Seat Platform above Foot Platform in same fashion and at identical angle.
- Page 9 CLIMBING INSTRUCTIONS CAUTIOUSLY put your weight on the foot platform. The additional weight will create tension on tree strap cables. Have both top and bottom platforms angled down towards base of tree to compensate for a smaller tree Before beginning to climb: Check that your harness is secure, check that cables are properly quickclipped, diameter at desired hunting height.
- Page 10 SEAT CUSHION INSTRUCTIONS 2. Insert the loose end of the strap through the opposite armrest and 1. Place Seat Cushion between the around the handle rail. 3. Pull strap underneath seat cushion armrests with the straps facing the ground. Insert the buckle end of the strap through and thread through the buckle.
- Page 11 BACKPACK STRAP INSTRUCTIONS Fig. 1 Fig. 3 Fig. 2 Fig. 6 Fig. 4 Fig. 5 Fig. 7 1. Turn Foot Platform over, insert the looped ends of the backpack straps up through the rear frame of the platform . (See Fig. 1) 2.
- Page 12 BACKPACKING INSTRUCTIONS PAGE 1 1. Remove Seat Cushion from Seat Platform. Fold platform so rail is towards the cable towards the rear of the platform. Screw the T-Knob back on the bolt. Insert the quickclip through the tab on the frame. 2.
- Page 13 BACKPACKING INSTRUCTIONS PAGE 2 5. Flip over the platforms so the bottom of the 6. Place the Seat Cushion on top of the Foot foot platform is on top. Pull the backpack Platform. Put the straps of the Seat Cushion straps out to the sides.
- Page 14 DETAILED BUCKLE AND STRAP INSTRUCTIONS Press down on latch and insert Hold buckle as shown strap underneath teeth as shown. Pull strap to desired length. Pull slack to tighten. ALWAYS tug on strap to make sure it is secured by the buckle before use ©2013 (rev.
- Page 15 HANG-ON TREESTAND BONE COLLECTOR CLIMBER HANG-ON TREESTAND 16’ RECON LADDERSTAND 15’ TWO-MAN LADDERSTAND BONE COLLECTOR AVENGER ALUMINUM TRIPOD ROOF KIT STEEL HANG-ON TREESTAND 20’ STICK 15’ TRIPOD RAPID RAILS LADDER...
Need help?
Do you have a question about the WMCS-400 and is the answer not in the manual?
Questions and answers