Advertisement
Product Introduction
This Gigabit Ethernet ExpressCard is a high performance 10/100/1000 BASE-T Ethernet LAN
controller which designed by VIA VT6130 chipset, is perfectly for home and office use. It provides a
low cost solution for connecting to a high speed Local Area Network with a data transfer rate up to
1000Mbps over a group of 4 twisted pair copper wires to a distance of maximum 100 meters away. It
is 100 times faster than, and yet 100% fully backward compatible with 10/100BASE-T system,
therefore, it can be easily plugged into almost any existing network with CAT-5 cabling.
Features & Specification
ExpressCard 34mm
Supports standard and low profile chassis
A high performance 1000BASE-T Ethernet controller card
Backward compatible to 10/100BASE-T networking
10/100/1000Mbps data rate auto negotiation operation
Compatible to existing CAT-5 UTP cabling
Fully IEEE 802.3, 802.3u (10BASE-T, 100BASE-TX),
802.3ab (1000BASE-T) & 802.3z (1000BASE-X) compliant
Supports half / full duplex mode and 802.3x Flow Control
802.1Q 8-level priority transmit and receive (MAC support 4 TD, 1 RD queue)
Supports IEEE 802.1Q VLAN tagging
Crossover Detection and Auto Correction operation
Fully Plug and Play
Wake-on-LAN function support
Ideal for home and office use
System Requirements
®
Windows
2000, XP/2003/Vista/ Win 7 (32/64 bit)
With an available ExpressCard slot
Package Contents
1 x ExpressCard Gigabit Ethernet Card
1 x User Manual
1 x Driver CD
Installation
1. Install the Product into your computer.
2. Please insert the CD driver bound with Gigabit Ethernet PCI Express Card into your CD-ROM
Drive.
3. Access the CD ROM Folder and Start the Installation Program.
4. Follow the on-screen instructions to complete the instructions to complete the installation to
complete the installation.
Advertisement
