Page 1
“Acare” Suction Unit ASU-200 User Manual Model No.: ASU-200 Please read the instruction manual before use Issued Date: Feb. 02, 2018 Version: 2.1...
Page 3
Please read the instruction manual before use Warning & Caution 1. This device is intended for use by professional. The manufacture recommends that user train on use this device. 2. Do not place or store product where it can fall or be pulled into a tub or sink. 3.
It is for use on the order of a physician only. THIS DEVICE IS NOT INTENDED FOR HEMOSPASIA Chapter 2. Product Description Standard Product Model Specification Accessory (1) Suction unit ASU-200 80 KPA (2) Suction container LAB-0019-00Z8 1000 ml (3) Connection tube φ7mm*φ12mm ...
Chapter 3. Set-up Connect the connection tube on the vacuum outlet. Connect the other side of connection tube on the suction container. Hook up the container with the container connection base. Connect either end of the suction tubing to the tubing connector then connect the other end to the bacteria filter.
Chapter 5. Cleaning & Maintain -Device Recommend that pour the liquid in the container before met the full line. Disinfected with diluted medical alcohol to clean the device surface after use. Disinfected with diluted medical alcohol to clean the accessories, such as suction container, connection tube, and suction tube…etc.
-600 mmHg (-80 Kpa) Exhaust Air Volume 24 L/MIN Supply Voltage AC 100-240V, 50/60Hz / DC 18V, 3.34A Acare Car Charger for DC 12V Lithium Battery 14.8 VDC, 2.5 AH Charging time: 3 hours Using Time: 60 min, after full charged Sound Level <70 dB (A)
Chapter 9. Symbol Definitions Symbol Explain Symbol Explain Type BF applied part Protect against solid The patient tubing is foreign objects of 50 IP21 applied part. mm φ & Protected against vertically falling water drops Serial number of the Attention, Consult product accompanying documents...
Need help?
Do you have a question about the ASU-200 and is the answer not in the manual?
Questions and answers