Page 2
index 01. The device • general • Manufacturer identification • Equipment identification 02. Precautions for use • feeding 03. General Warnings • Before using the device • elimination 04 Technology • Technical data 05 Installation and Use...
Page 3
Sanity Air reserves the right to modify the product and its technical documentation without incurring any obligation to third parties and assumes no responsibility for errors or inaccuracies in the content of this manual. This document describes serial device features from the date this publication is licensed for printing.
Page 5
Sanity Air S.L. Calle Valdemorillo, 6 28925 Alcorcón. Madrid info@sanity-air.com www.sanity-air.com...
Page 7
Always follow the precautions below to avoid the risk of serious injury, serious damage to people or things, due to electric shocks, short circuits, fires or other hazards! CAUTION: Under no circumstances open or alter the device. Maintenance or repair operations must be performed exclusively by authorized technical personnel, other than doing so automatically will result in the IMMEDIATE SUSPENSION OF THE WARRANTY.
Page 8
ELECTRIC NETWORK DANGER Always disconnect the power supply from the device before doing any work on it to avoid health risks and damage. Do not pull the power cord to unplug or transport it. Any handling, maintenance, repair and hygiene of the systems must be carried out by authorized technicians duly trained and authorized by the manufacturer.
Page 9
Support Center or distributor. Sanity Air is not responsible for the consequences of prolonged use of the device that has revealed anomalies. Any maintenance or repair work must be performed only by authorized personnel.
Page 10
controls and do not play with the device. Packaging elements should not be left within reach of children as a potential source of danger. During the warranty period, no intervention can be performed without the prior authorization of the Assistance Center, distributor or manufacturer. If this is not accounted for, the warranty will end automatically.
Page 11
The process is to attract and circulate the air inside Sanity Air filter and disinfect it: the suspended droplets are purified by active carbon filters while the entire volume of air is sterilized by ultraviolet rays (UVC), thus ending with any pathogens it may contain, all without adding chemicals or biocides that may be harmful to our health.
Page 12
WITH BOX 590 X 340 X 175 (mm) APPROX. WEIGHT WITH 6.8KG 10.15 KG 27KG 4.5KG 4.5 KG 3 KG PACKAGING 40.5 Dba at 2 meters Note: In the Netherlands we have Sanity Air BASIC (M) and Sanity Air Plus (L).
Page 13
Handle the device with the necessary precautions to be taken when handling fragile materials. Be careful not to throw away parts of the device The manufacturer declines all responsibility with respect to the installation of the device, therefore, any damage to things and / or persons attributable to them IS NOT IN ANY CASE attributable to the manufacturer.
Page 14
The device must be installed by authorized technicians in accordance with current legislation (Ministerial Decree 37/08 and subsequent amendments, instead hygienically, appropriate protected from freezing and direct spraying of water and in a space that allows easy extraction of parts, parts, for necessary maintenance and checks.
Page 16
STEP 4. Position the equipment on the surface where the installation is to be carried out and mark the position of the holes to be performed. STEP 5. Anchor the equipment to holes made using fixing plugs or similar. STEP 6. Make sure that the equipment is firmly installed, in case you have decided to install it on a wall or similar, at a height of approximately 1.9 m from the ground, you can also use the equipment on a flat surface as long as its immobility is ensured.
Need help?
Do you have a question about the Sanity Air and is the answer not in the manual?
Questions and answers