Table of Contents
Advertisement
1
LOW SPEED - for light blending of liquid ingredients
2
HIGH SPEED - for heavy blending with solid
ingredients and thicker liquids.
PULSE SHORT BURSTS OF VERY HIGH SPEED - for rough
blending of solid ingredients and thicker liquids,
ice crushing, grinding and short, powerful pulse
movements. The dial does not permanently engage
• To achieve the best results when pureeing solid
ingredients, place small portions into the glass blending
jug
one by one instead of placing a large quantity all
5
at once. Do not overload.
• When processing solid ingredients, cut them into small
pieces (2-3cm) first.
• When mixing solid ingredients start off first with a small
amount of liquid. Gradually add more of the liquid
through the opening in the lid
Never immerse the motor unit in water.
Wipe the motor unit
clean with a damp cloth and dry
6
immediately with a soft cloth to avoid scratches and water
marks on the surface.
LIGHT CLEANING
empty the glass blending jug
•
BLENDER:
way with tepid water and a mild detergent. Place the glass
blending jug
on the motor unit
5
switch
several times into the PULSE setting, holding for a
7
few seconds each time. Empty the glass blending jug
rinse until clean, then dry.
to clean the grinding mill
•
GRINDING MILL:
it with a damp cloth or sponge, using a tepid water
with some washing up liquid, if necessary. Remove any
stuck food remains with a small dish washing brush. Dry
immediately with a soft cloth.
SPEED SETTINGS
USEFUL TIPS
.
2
CLEANING
and fill it half
5
and turn the rotary
6
and
5
wipe inside
4
in the PULSE setting; you must hold the dial in
position or turn repeatedly to the PULSE setting.
After using the blender
8
the rotary switch
back to the 0 setting and disconnect
7
the mains cable from the power socket. To remove the glass
blending jug
just lift it straight up.
5
• If blending warm liquids or ingredients always ensure
that they are cooled down before blending. Do not fill
the glass blending jug
• Always stabilise the glass blending jug
by placing your hand on top of the lid
4
mill cover
when operating the appliance.
3
• For stirring solids or very thick liquid ingredients we
recommend that you use the blender
to prevent the blades from becoming stuck.
THOROUGH CLEANING
Be careful when handling the blade inside the jug.
The blades are very sharp.
Ensure that the grinding mill
•
BLENDER:
is completely empty before you remove the stuck food
5
around the blades using a small dishwashing brush.
• All parts except the motor unit
hand or in a dishwasher. Do not use harsh scourers and
aggressive or abrasive detergents.
or the grinder
, always turn
9
over 1L / 4 cups mark.
5
or grinding mill
5
or grinding
2
in PULSE mode
8
or blending jug
4
can be washed by
6
5
Advertisement
Table of Contents
