Contents Introduction Document Scope Publication Log SPA-PABXR-V2 PABX Recall Voice Recorder Application Audio Passes Directly Through Audio Playback without Delay Audio Playback with Delay Detection of on Hook Line When Connected to Phone Line Function Settings DIP Switch ‘PROG’ Settings Jumper ‘J1’...
2 SPA-PABXR-V2 PABX Recall Voice Recorder The SPA-PABXR-V2 is a recall unit which can be connected to either the telephone network or a trunk interface. Both connection possibilities have 3 program settings: 1. Let the Low Frequency (LF) signal pass directly through.
In trunk mode the unit can operate without an exchange. Connect an audio input and a potential free switch (dry contact) for activation to X151. There is no individual zone selection in this mode. 3.3 Volume P1 With Potentiometer P1 it is possible to adjust audio output level. SPA-PABXR-V2 PABX Recall Voice Recorder...
Recorded Tone: 425 Hz ± 25 Hz / –22 dBm – 0 dBm DC Loop Current: 8 mA – I (according to TBR 21, section 4.7.1: I = 60mA) 4.1 Environment Working Temperature: -15 °C to +55 °C Humidity: 93% RH SPA-PABXR-V2 PABX Recall Voice Recorder...
3 (Input) TI Switch. When in “TRUNK” mode use X151 (position 3+4) with a potential free contact for activation. When released it will automatically play back the message with delayed playback setting. 4 (Input) TI Switch SPA-PABXR-V2 PABX Recall Voice Recorder...
Indicates current zone is active at playback. Zone 3. Indicates current zone is active at playback. Zone 4. Indicates current zone is active at playback. Zone 5. Indicates current zone is active at playback. Zone 6. SPA-PABXR-V2 PABX Recall Voice Recorder...
6.3 Detection of Missing Loop Current Sløjfestrøm Hook flash Hook off Afløftning Engaging of Indkobling af circuit øvrigt kredsløb Engaging of Indkobling af LF LF output output NO_LOOP_CURRENT = 0.4 ms +/- 0.1 ms NO_LOOP_CURRENT SPA-PABXR-V2 PABX Recall Voice Recorder...
Page 11
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel and Vingtor-Stentofon products are developed and marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.