Summary of Contents for Tellur TLL441101
- Page 1 LED emergency signal and flashlight User manual TLL441101 This manual is available in more languages on www.tellur.com...
- Page 2 LED emergency signal and flashlight Before use, it is required to install the batteries (3 AAA). A small Phillips screwdriver is needed. *We recommend using only quality batteries in order to avoid corroding inside your electronics, even if fully discharged. Turn your LED emergency signal over to see the two small screws on the back.
- Page 3 negative (-) end towards the top. The batteries on each side will have the positive (+) end to the top of the signal. Now press the on/off button to make sure that the LED signal is operational. Replace the rear cover, making sure that the top of the curved hook is towards the top of the signal (12 o’clock position), and directly behind of the LED work light on the front.
- Page 4 7.Steady Full Beam 8.Steady Low Beam 9.White LED Work Light 10.Off Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives;...
Need help?
Do you have a question about the TLL441101 and is the answer not in the manual?
Questions and answers