Advertisement
GP-377L/S Backlight Replacement Guide
Thank you for purchasing a set of GP-377L/S replacement backlights. Be sure to read the
following Backlight Installation Cautions before attempting to change this unit's backlights. This
replacement backlight package contains the following:
GP377-LG**
GP377-SC**
If this backlight is not appropriate for your GP unit or does not function correctly, please contact
your local authorized GP representative.
Backlight Installation Cautions
• Whenever changing the backlight, be sure the GP's power cord has
been disconnected. When the GP's power cord is connected and the
GP is ON, high voltage runs through the wires in the backlight area.
• When the GP's power has just been turned OFF, the backlight area
is still very hot. Be sure to wear gloves to prevent being burned.
• Since the backlight is made of thin glass, handling it roughly may
cause it to break. Therefore, when installing the backlight be sure to
handle it carefully.
•
Check that no water, oil or fingerprints are left on the tube,
since they can all reduce the backlight's life.
Package Contents
• Replacement Backlight (1) (Model : GP377L/S-BL00-MS)
Items Required When Changing The GP's Backlight
• Phillips type screwdriver (no. 2) for GP's rear cover attachment screws.
• One pair of clean (preferably new) cotton gloves.
Also, a small container for the removed attachment screws will help to prevent them from be-
coming lost or misplaced.
Unit Type
Backlight Model
GP377L/S-BL00-MS
Advertisement
