Advertisement
Quick Links
Sleeve
Figure 1
Ensure that the plastic sleeves,
that lock the seat and cover
together, are present, Figure 1,
before inserting the hinge pins into
the sleeves.
Check the orientation of the
hinges, Wall Hung pans throw
backwards, Figure 2a, Close
Coupled and Back to Wall pans
throw forwards, Figure 2b. This
ensures that the seat lines up
correctly.
Figure 2a
Figure 2b
Sleeve
Hinge Pin
Fit rubber centralising washers
into the holes in the pan and
lower the seat and cover, Figure 3,
ensuring that the hinges are
inserted in the holes in the
centralising washers.
Firstly fit a plastic coated
washer, then a steel spring washer
and nut to the thread of each hinge,
Figure 4, before tightening with the
tool provided.
!
Figure 3
Figure 4
Advertisement
Related Manuals for Ideal-Standard Alto Toilet Seat
Summary of Contents for Ideal-Standard Alto Toilet Seat
- Page 1 Sleeve Figure 3 Hinge Pin Sleeve Figure 1 Ensure that the plastic sleeves, Fit rubber centralising washers that lock the seat and cover into the holes in the pan and together, are present, Figure 1, lower the seat and cover, Figure 3, before inserting the hinge pins into ensuring that the hinges are the sleeves.
- Page 2 CARE AND CLEANING INSTRUCTIONS Toilet Seat Installation The seat and cover should be cleaned using warm soapy water. Alto and Halo Closets Do not use aggressive or abrasive cleaners as this may Important Care and scratch the surface of the seat. Installation Instructions, The hinges should be cleaned using soap, or a mild Please retain for future reference.