Advertisement
Install the lateral L angles and diagonal L angles to the Top Skin as previously done
on the other Rear Fuselage Skins. The lateral L angles overlap the Longeron rivet
lines. The diagonal L angles do not overlap any other parts.
Reference: See drawing 75-FA-2 for L angle locations and orientation.
Cleco the Rear Side Skin to the Rear H.T. Frame. Check the bottom of the Rear Side Skin to be sure it is
positioned correctly on the Longeron. The Skin edge should be against the lip on the Longeron at the start of
the radius. With a #30 drill bit, back drill through the Rear Side Skin into the Longeron and Cleco. With a #20
drill bit, expand the holes through the Rear Side Skin into the Rear H.T. Frame and Cleco.
STOL
Zenith Aircraft Company
CH750
www.zenithair.com
Revision 2.0 (8/13/2010)
© 2010 Zenith Aircraft Co.
P/N: 75F2-1
Top Skin
Rear Fuselage Top Skin & Rear Fuselage
Assembly
Section 75-FA-2Page 2 of 9
Advertisement
