1. Manuals
  2. Brands
  3. axing Manuals
  4. Modulator
  5. HKM 40-02
  6. Manual

axing RF HKM-4002 Manual

Hdmi | dvb-c/t encoder/modulator
Hide thumbs Also See for RF HKM-4002:
Table of Contents

Advertisement

Quick Links

Download this manual
HKM-4002
HDMI | DVB-C/T encoder/modulator
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RF HKM-4002 and is the answer not in the manual?

Questions and answers

Related Manuals for axing RF HKM-4002

Summary of Contents for axing RF HKM-4002

  • Page 1 HKM-4002 HDMI | DVB-C/T encoder/modulator...
  • Page 2 Table of contents Safety instructions: ⦁ The installation of the device and repair work on the device must be carried out only by a professional in accordance with the applicable VDE directives. In case of incorrect installation, no liability is assumed. ⦁...

  • Page 3: Product Description

    overheating. It must be always ensured that cables are not located near heat sources (e.g. heaters, other electrical appliances, fireplace, etc.). ⦁ The device is intended for transmission of audio and video signals via LAN cable. Misuse of the device is expressly prohibited. ⦁...

  • Page 4: Graphical User Interface

    ⦁ Output/modulators The HKM 4002 has four output modulators. Theese will be streamed in one or two output channels (DVB-C / DVB-T). ⦁ Graphical user interface The settings can be changed via the graphical user interface. To access the user interface and thus configure the devices, you need a standard PC/laptop with a network interface and the actual version of the installed web browser.

  • Page 5: Mounting And Installation

    ⦁ Display elements and connectors 1. LED indicators 2. Mains connection 3. RF output 4. Test port 5. HDMI inputs 6. RJ45 Ethernet connector ⦁ Mounting and Installation ⦁ Installation must be performed by authorized and skilled electricians only. ⦁ Before mounting and installation, pull the mains plug! The HKM-4002 can be mounted on either at the wall or be mounted in a 19 "rack.
  • Page 6 ⦁ The installation must be carried out on an even and vertical surface (any unevenness must be compensated). ⦁ Fix the HKM-4002 with 4 screws appropriated for the installation surface (1). ⦁ The HKM-4002 must be connected to the equipotential bonding according to EN 60728-11 (2).

  • Page 7: Power Supply

    Connect the output of the HKM-4002 to the existing DVB-C / DVB-T distribution. Use shielded coaxial cables with F connectors. You can find suitable cables and connectors in the current AXING catalog or at www.axing.com. If you are using more than one HKM-4002, the outputs must be connected with suitable combiner.
  • Page 8 ⦁ Connect the power cord to an appropriate wall outlet. ⦁ Configuration The device is configured via the graphical user interface of the integrated web interface. To access the user interface, you need a standard PC/laptop with a network interface and the actual version of the installed web browser. To connect the network interface of the device to the computer, you need a commercially available network cable.
  • Page 9 ⦁ Login ⦁ Start your web browser and enter the IP address of the device: 192.168.0.168. The web-based user interface is protected against unauthorized access. When accessing the user interface, the first thing is the password request. ⦁ Enter the default password: Ramsen8262. Changing the password: ⦁...
  • Page 10 the Frequency field. ⦁ Select an output level of 85 ... 105 dBμV in the Output level selection field. ⦁ The symbol rate between 1000 and 7500 can be freely set in the Symbol Rate field. The default value is 6900. Some networks also work with 6875. If working with only 7MHz bandwidth, a symbol rate of 6111 is in use.

  • Page 11: Video Source

    By changing the FEC factor, the proportion of the FEC data is changed in relation to the user data. (FEC ½ = low data rate but strong error protection, FEC 7/8 - high data rate but low error protection). ⦁ In the Guard Interval field, select the protection interval from 1/32, 1/16, 1/8, 1/4.

  • Page 12: Audio Source

    ⦁ In the Port selection field, select video source to 4. ⦁ For each video source, set the or select a value between Encoder Rate Auto 4 ... 14 MHz. Resolution Current Rate fields indicate the resolution and bit rate of the connected video source.
  • Page 13 ⦁ Service Name The names of the four output streams are defined here. These are displayed as program names in the TV set after the programm scan. ⦁ In the Port selection field, select to 4. ⦁ Enter a maximum 15-character program name in the Service name field.
  • Page 14 ⦁ In the selection field, select to 4. Port ⦁ In the LCN field, enter a logical channel number between 1 and 1023. If the connected TVs support LCN, the respective stream is stored there under the entered program location. ⦁...
  • Page 15 carried out by experienced users. ⦁ Click Safe Settings to save your settings. ⦁ ⦁ Transporstream ID (Transportstream ID) must be unique for each transportstream. If further TS ID transport streams occur in your DVB-C / T network, you may have to assign a different ID here.
  • Page 16 ⦁ Click Safe Settings to save your settings. ⦁ Service Type HD or SD ⦁ In the Port selection field, select to 4. ⦁ In the selection field, select for each stream whether it is output in Service Type or SD. ⦁...
  • Page 17 Retrieve Inventory you will find the current version of the HKM 40-00. ⦁ Upgrade Software Under Upgrade Software a new software for the interface can be installed. Software updates are available at www.axing.com Downloads. ⦁ Download this to your PC.
  • Page 18 ⦁ Click to install a new software. Upgrade Software ⦁ Click "Browse ...". ⦁ Browse for the software file on your PC and confirm. The file is loaded into the device. The upload progress is displayed. The device is then upgraded. The remaining time is displayed. ⦁...
  • Page 19 ⦁ Click Safe Settings to save your settings. ⦁ After the changes have been saved, the HKM-4002 is restarted automatically. ⦁ After restarting, you must enter the new IP address in the browser and log in again. ⦁ Language Here you can select the language of the interface. ⦁...
  • Page 20 ⦁ Enter a new password with 8 to 10 characters and / or numbers. ⦁ Re-enter the password. ⦁ Click to save your settings. Safe Settings ⦁ After the changes have been saved, the start page is displayed, you must log on again.

  • Page 21: Technical Specifications

    ⦁ Technical specifications Inputs 4 × HDMI Video encoder H.264, MPEG-2 Max bit rate per channel 16 Mbit/s Video solution 1080p@60 Hz Audio encoder MPEG1 audio layer II Output TV channels 1 or 2 × DVB-C/DVB-T Output frequency range DVB-C | DVB-T 45..862 MHz Output channels DVB-C | DVB-T E2..E69...

Table of Contents