Download Print this page

HAGOR 5450 Installation Instructions Manual page 6

Advertisement

Fix the top mounting rail with references
Important: the mounting rail must be perfectly horizontal, we recommend the use of the "laser" level.
1 3
A
ATTENZIONE: PERICOLO
I FISSAGGI A PARETE NON SONO IN DOTAZIONE, E DEVONO ESSERE SCELTI DALL'INSTALLATORE.
IMPORTANTE:
La portata massima è garantita per pareti di calcestruzzo, mattone pieno, acciaio, legno massello o comun
Montieren sie die Schiene an der Wand, nutzen sie die zuvor markierten Referenzpunkte (A). Bitte
strutture adeguate.
achten sie auf eine exakt waagerechte Ausrichtung. Wir empfehlen hierfür eine Laser-Wasserwaage.
Verificare che i punti di fissaggio siano integri e adeguati allo scopo nel tempo.
Mount the rail on the wall, use the previously marked reference points (A). Please pay attention to an
LA DITTA COSTRUTTRICE NON SI ASSUME ALCUNA RESPONSABILITA' IN CASO DI DANNI DERIVA
exactly horizontal alignment. We recommend a laser level for this.
DA FISSAGGI NON CORRETTI O DA FISSAGGI A PARETI NON ADATTE A SOSTENERE IL PESO INDICATO.
4
Montare il pannello orizzontale inferiore con gli angolari verticali e fissarlo alla parete.
Mount the bottom mounting rail with vertical bracket and fix it to the wall.
WARNING: DANGER
4
THE WALL MOUNTING ARE NOT INCLUDED, AND MUST BE CHOSEN BY THE INSTALLER.
IMPORTANT:
Pannello superiore
obere Montageschiene
The maximum weight is guaranteed for concrete wall, solid brick, steel, solid wood or otherwise adapt structures.
Check that the fixing point are intact and conform for the purpose in time.
upper mounting rail
Top mounting rail
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGES ARISING FROM MOUNTING INCORREC
OR WALL MOUNTING NOT APPROPRIATE TO SUPPORT THE WEIGHT INDICATED.
Verschrauben sie die obere und die untere Montageschiene mit Hilfe der Verbindungsschienen.
Montare i perni M8 sul retro dello schermo.
5
Schrauben sie die untere Montageschiene anschließend an der Wand fest.
Montare le ghiere sui perni.
Screw the upper and lower mounting rails together by using the connecting rails.
Mount the pins M8 on the back of the screen.
Subsequently fix the lower mounting rail to the wall.
Mount the ring nuts on the pins.
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
untere Montageschiene
Verbindungsschiene
Angolare verticale
connecting rail
Vertical bracket
A
.
Die Befestigungsmaterialien für die Wandmontage sind NICHT inklu-
diert. Bitte informieren sie sich zu den benötigten Materialien vor Ort.
The fastening materials for the wall mounting are NOT included.
Please inform yourself about the required materials locally.
Pannello inferiore
lower mounting rail
Bottom mounting rail
A
Bitte beachten!
Please note!

Advertisement

loading

This manual is also suitable for:

541553705375554053955410 ... Show all