Do you have a question about the AMASET+ and is the answer not in the manual?
Questions and answers
Summary of Contents for Amazone AMASET+
Page 1
Operator's manual AMASET Switch box Before starting operation MG2047 carefully read and adhere to BAG0007.4 08.16 this operator's manual. Printed in Germany Keep for other users!
Page 2
Preface Reading the instruction manual and to adhere to it should not appear to be inconvenient and superfluous as it is not enough to hear from others and to realise that a machine is good, to buy it and to believe that now everything would work by itself.
Contents User advice ....................4 Purpose of the document ......................4 Information about directions in this operator's manual ............4 Illustrations used ........................4 General safety advice .................. 5 Illustration of safety advice ....................... 5 Product description ..................6 Overview ..........................6 Designated use of the machine ....................
User advice User advice The chapter "User advice" provides information for dealing with the operator's manual Purpose of the document The present operator's manual • describes the operation and the maintenance for the machine. • gives important hints for a safety conscious and efficient opera- tion with the machine.
General safety advice General safety advice Illustration of safety advice The safety advice is identified by a symbol and a warning. The warn- ing describes the seriousness of the threatened danger. The individu- al symbols have the following meaning: DANGER Immediately imminent danger for life and health of persons (se- vere injuries or death).
Product description Product description This chapter ● provides you with a comprehensive survey about the design of the AMASET • provides the descriptions of the individual components and parts Overview Fig. 1 (1) Key ON / OFF (6) Indication tilt adjustment (2) Indication spraying pressure (7) Indication locking of the swing compensa- tion...
• adhering the service and maintenance work. • the exclusive use of AMAZONE original - spare parts. Other use than that stipulated is prohibited and is no longer consid- ered as designed use. For damage resulting from not designed use •...
Assembly and function Assembly and function The following chapter informs you about the assembly of AMASET and the functions of the individual components. Display / Indications • Indication spraying pressure Shows the spraying pressure during operation of the field sprayer. •...
Assembly and function • Switch for switching on / off the boom part width sections. The number of switches is equal to that of the boom part width sec- tions. Left hand switch – boom part width section outermost left hand side off / on. Right hand switch –...
Putting into operation Putting into operation In his chapter you will find information for putting your machine into operation. DANGER Before putting the machine into operation ensure that the opera- tor has read and understood the operator's manual. DANGER Please also refer to the operator's manual for the field sprayer!. Initial operation •...
Settings Settings Setting the equal pressure valve chest Setting the equal pressure valve chest • once a year. • at every nozzle change. Hint! The equal pressure valve chest can be adjusted for 5 different nozzles, according to the 5 colours on the pre-selection disks. In order to get a nozzle to work the related colour of the disk should point towards the left hand side.
Page 12
Settings 8. Pre-adjust the equal pressure valve chest via the stud screw (Fig. 4/2). ο Close one boom part width section via a boom part width section switch (Fig. 2/4). The adjusted spray pressure changes on the spray pressure indica- tion.
Operation of the machine Operation of the machine DANGER • When starting to operate the machine observe the opera- tor's manual for the field sprayer. • When operating the machine observe the chapter "Safety advice for the operator", page 5. 1.
Page 14
Operation of the machine Switching on spraying operation and spraying the area. Switching off spraying operation. 13. Align the sprayer boom horizontally natural and fold in green via control valve on the tractor. 14. Via control valve on the tractor yellow lower the sprayer boom until the transport securing device locks.
Faults Faults Cause Remedy Fault Spray rate is not correct Pressure meter is defective Contact an authorised workshop Nozzles are worn Exchange the nozzles Spray pressure adjustment is not Power supply is interrupted Check the power supply possible Switching boom part width sec- Power supply is interrupted Check the power supply tions is not possible...
Page 16
H. DREYER GmbH & Co. KG Postfach 51 Tel.: + 49 (0) 5405 501-0 D-49202 Hasbergen-Gaste e-mail: amazone@amazone.de Germany http:// www.amazone.de Branch factories in: D-27794 Hude • D-04249 Leipzig • F-57602 Forbach • Subsidiaries in England and France Factories for mineral fertiliser spreaders, field sprayers, seed drills, soil tillage implements,...
Need help?
Do you have a question about the AMASET+ and is the answer not in the manual?
Questions and answers