Quantum iAccess Quick Start Manual

If you require any assistance with these instructions, please
call Quantum Rehab Technical Service at 1-877-800-1248.
Canada providers, phone 1-888-570-1113.
Step One
Carefully open the unit
by inserting a #2 or #1
flat screwdriver between
the top and bottom.
Step Two
Using a #2 or #1 flat
screwdriver, remove the
logic board assembly by
pressing away the top
case clip.
Step Three
Remove the keypad and/
or top case as required.
iAccess Replacement Parts Kit
Step Four
Replace the keypad and/
or top case.
Step Five
Verify that the logic board
assembly
secured by the clip.
Step Six
Close the unit by pressing
the bottom case against
the top case. Verify that
all four clips are properly
engaged.
www.quantumrehab.com
Document Information: Rev A/January 2020
is properly