Lascar EL-WEM Quick Start Manual

EL-WEM Quick Start Guide
Wireless Indoor Air Quality Monitor
1
Set up a Cloud Account
To begin setting up your EL-WEM, you first need
an EasyLog Cloud account:
• Visit easylogcloud.com and click Sign Up Now
• Next, download the EasyLog Cloud App onto
your phone or tablet
2
Getting to know your WEM
The power button has the following functions:
Function Turn the device on, force
data synchronisation with
the Cloud, create audit
mark on the Cloud, mutes
the sounder if in alarm
Resetting your EL-WEM
Reset
Done by pressing the Reset Button
• Device will restart, all stored data and the configuration
will be retained
Factory Reset
Done by pressing the Setup Button for more than 10s
• Erases all stored data
• Erases all configuration
• Reverts to default settings and restarts the device
Setup Mode
Done by pressing the Setup Button for more than 3s
• For connecting to the Cloud - see Section 4 of this guide
Supply Voltage: 5Vdc, 1A
IP Rating: IP40
Safety Information
Short Press Long Press Press and Hold
<1s Between 1s and 10s
Turn the device off Start CO Calibration Mode
2
(EL-WEM+ only)
WARNING: Failure to follow these safety instructions could result in fire, electrical shock, other injury or damage.
Repairing or modifying
Never attempt to repair or modify this product. Dismantling may cause damage that is not covered under the warranty. Servicing
should only be provided by an approved supplier. If the product has been punctured, or seriously damaged do not use it and
return it to an approved supplier.
EasyLog Cloud harnesses the power of IoT to automate data
logging and alert notifications. EasyLog Cloud gives you the
ability to monitor and manage multiple data logging devices
in different locations completely remotely.
The system easily scales to meet your needs. Perfect
for everything from compact systems with just a few
measuring points to corporate solutions with thousands
of devices around the globe.
Power Button
>10s
Status Ring
Setup Button
Bottom Of Unit
Reset Button
Power Socket
Your data, anytime, anywhere
3
1 Plug in the power supply using
the USB cable provided.
2
Press the button on top
of your EL-WEM to turn
it on.
3 When you first turn
your EL-WEM on, the
blue light in the power
button will flash. This
indicates the EL-WEM is
not currently connected
to a WiFi network.
4
For the first 5 minutes after you
turn on your WEM, the sensors
self-calibrate. You may not
see readings for all the
sensors on the Cloud
during this time.
Power supply
Only use a genuine EL-WEM power adapter to power your EL-WEM air quality monitor.
Disposal and recycling
You must dispose of this product according to relevant laws and regulations. This product contains electronic components and
therefore must be disposed of separately from household waste.
Turn on your EL-WEM