Jodale Perry Corporation JDP ROPS Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

JODALE-PERRY

Corporation

P.O. Box 909

300 Route 100

Morden, Manitoba

Canada, R6M 1A8

Phone(204) 822-9100

Fax (204) 822-9111

Email jodale @ mts.net

OPERATOR'S MANUAL

THIS MANUAL MUST REMAIN WITH THE JDP ROPS:

SERIAL NO.

IF IT IS STOLEN, LOST OR MISPLACED,

CONTACT JODALE PERRY FOR AN IMMEDIATE

REPLACEMENT PRIOR TO OPERATING THE TRACTOR.

JDP ROPS

PRINTED IN CANADA 01/01/23

Table of Contents

Need help?

Do you have a question about the JDP ROPS and is the answer not in the manual?

Questions and answers

Summary of Contents for Jodale Perry Corporation JDP ROPS

Page 1 Phone(204) 822-9100 Fax (204) 822-9111 Email jodale @ mts.net OPERATOR’S MANUAL THIS MANUAL MUST REMAIN WITH THE JDP ROPS: SERIAL NO. IF IT IS STOLEN, LOST OR MISPLACED, CONTACT JODALE PERRY FOR AN IMMEDIATE REPLACEMENT PRIOR TO OPERATING THE TRACTOR.
Page 2: Table Of Contents
TABLE OF CONTENTS SECTION DESCRIPTION PAGE Introduction Safety General Safety Operating Safety Safe Operation in Rough Terrain Maintenance Safety Safe Highway Operation Safety Decals ROPS Safety Emergency Exits Decal Listing Operating Instructions Post Mounting Procedure Trouble Shooting...
Page 3: Introduction
1.0 Introduction We at Jodale Perry are pleased you have chosen a JDP ROPS for your tractor. The JDP ROPS has evolved through ideas and suggestions submitted to us by customers such as yourself. We ask that you study this manual and adopt the practices outlined in it.
Page 4: Safety
2.0 Safety Carefully review the procedures given in this manual and the tractor operator’s manual with all operators annually. It is important that all operators be familiar with, and follow, safety precautions. Operating instructions must be given to everyone using the tractor before operation and at least once yearly thereafter in compliance with OSHA Regulations 1928.57 (United States).
Page 5: Safe Operation In Rough Terrain
Keep all shields in place when pedal operation or entry/exit from operating the tractor. tractor. Do not operate the tractor when you are When servicing components are too tired, sick or impaired. high to reach from the ground use steps and handholds.
Page 6: Safety Decals
Ensure headlights are aligned so they If the tractor in not equipped with seat will not blind the operator’s of belts, purchase approved seat belts from oncoming vehicles. If the tractor is not the tractor manufacturer or JDP prior to equipped with turn signals and law operating the tractor.
Page 7: Decal Listing
Page 5...
Page 8: Operating Instructions
3.0 Operating Instructions IMPORTANT The following section locates, identifies and briefly describes the functions of all cab controls. All operators should familiarize themselves with control location and function prior to operating the tractor. Failure to do so may result in unsafe operation of the tractor and possible injury or death to operators and bystanders.
Page 9: Post Mounting Procedure
4.0 Post – Mounting Instructions Before starting a tractor equipped with a JDP cab: Clear the cab and tractor of all tools. Tools left in or around the cab and tractor can cause operator interference which could lead to bodily injury and/or damage the machine. Inspect the cab and tractor to ensure all bolts are tight and tighten if required.
Page 12 RM6000-Parts-book.xls Item # JDP Part # Assembly Description Material Description Size Unit Roof 101022 ROPS Roof Plastic, ROPS Roof Left Door Breakdown 101718 Door Frame Weldment Weldment 101719 Mesh Frame Upper Door Weldment 101720 Mesh Frame Lower Door Weldment 100408 Fastener Screw, #8 x 1/2"...