Table of Contents
Advertisement
Installing Your N
Positioning:
Position the appliance away from sou
of stoves, radiators, direct sunlight etc.
Maximum performance and safety are
Maximum performance and safety are
guaranteed by maintaining the correct
guaranteed by maintaining the correct
indoor temperature for the class of unit
indoor temperature for the class of unit
concerned as specified on the rating plate.
concerned as specified on the rating plate.
This appliance performs well from SN to
This appliance performs well
ST. The appliance may not work properly
may not work properly
if left at a temperature above or below the
if left at a temperature above or below the
indicated range.
Climate class
Ambient temperature
Ambient temperature
SN
N
ST
T
Appliance must not be exposed
must not be exposed to rain.
Sufficient air must be allowed to circulate
Sufficient air must be allowed to circulate
in the lower rear section of appliance, as
in the lower rear section of
poor air circulation can affect performance .
poor air circulation can affect performance
Built-in appliance should be positioned
should be positioned
away from heat sources such as stoves,
away from heat sources such as stoves,
fires or heaters.
Installation instructions:
Installation instructions:
Before
installing,
installing,
carefully
carefully
instruction in order to avoid a certain
instruction in order to avoid a certain
number of problems.
This is Dimensions of mounting slot
Dimensions of mounting slot .
N ew Appliance
away from sou rces
direct sunlight etc.
+10°C to +32°C
+10°C to +32°C
+16°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +38°C
+16°C to +43°C
+16°C to +43°C
read
read
the
the
Follow the steps in the
guide provided.
Note: Your product is designed and built
Your product is designed and built
for domestic household use only. The
for domestic household use only. The
product
must
be
be
located and operated in accordance with
located and operated in accordance with
the instructions contained in the User
the instructions contained in
Instructions guide provided.
provided.
Reversing the fridge door
The side at which the door opens can be
The side at which the door opens can be
changed, from the right side (as supplied) to
changed, from the right side (as supplied) to
the left side, if the installation site requires.
the left side, if the installation site requires.
Warning! When reversing the door,
Warning! When reversing the door, the
appliance must not be connected to the
appliance must not be connected to the
mains. Ensure that the plug is removed
that the plug is removed from
the mains socket..
Tools you will need(Not provided):
Tools you will need(Not provided):
Philips Screwdriver &
Slotted Screwdriver
Note:
When required, tilt the refrigerator back in
When required, tilt the refrigerator back
order to gain access to the base, you
order to gain access to the base, you
should rest the appliance
appliance on soft foam
packaging or similar material to avoid
packaging or similar material to avoid
damaging
damaging
the
the
backboard
backboard
refrigerator. To reverse the door, the
refrigerator. To reverse the door, the
following
following
steps
steps
recommended.
1. Stand the refrigerator upright. Open the
1. Stand the refrigerator upright. Open the
door, remove the upper hinge cover
remove the upper hinge cover (left
and right). Remove the lower screw hole
Remove the lower screw hole
cover for the cabinet. Remove the screw
hole cover for the door.
6
in the installation
correctly
correctly
installed,
installed,
door
Wrench( 8mm)
Wrench(
of
of
the
the
are
are
generally
generally
Remove the screw
Advertisement
Table of Contents
