SunEarth MTG-LSR-52-19 Installation Instructions

Thank you for purchasing the SunEarth Landscape Rack. The use of all stainless steel hardware and 6063-T6 structural aluminum
makes the SunEarth Landscape Rack a simple, strong, and durable solution for your landscape or sawtooth racking needs.

Package Contents:

Suggested Installation Steps

Step 1

Step 2

www.sunearthinc.com
Landscape Rack Installation Instructions
MTG-LSR-42-__ & MTG-LSR-52-__
4
5
2 EA Support Strut 42" or 52" Length, (Black Anodized pictured)
1
2 EA Rear Leg, 2" x 2" C Channel
2
2 EA Front Foot, 2" x 2" C-Channel, 4" Length
3
2 EA Rear Foot, 1 1/2" C-Channel, 4" Length
4
4 EA C-SSN (collector clip, 3/8" x 1" stainless steel bolt, 2 x washers, 1 x lock washer, 1 x nut)
5
6 EA Bolt Assembly (5/16" x 2 1/2" stainless steel bolt, 2 x washers, 1 x lock washer, and 1 x nut)
6
Determine Front Feet positions and securely fasten Front Feet
an acceptable fastening method for the mounting surface and your local conditions.
Insert Support Strut into Front Foot, insert bolt, and tighten nut. Make sure not to over
tighten. SunEarth recommends tightening the nut approximately
the lock washer or torque of 12ft lbs. Repeat for remaining Support Strut.
2
1
to mounting surface using
3
turn past the setting of
1/2
6
3