Table of Contents
Advertisement
Quick Links
pH Controller
INSTALLATION & STARTUP GUIDE
MODEL: NKD-pH
NOTE:
1.
READ THIS DOCUMENT PRIOR TO INSTALLATION. IMPROPER INSTALLATION WILL VOID WARRANTY.
2.
PRODUCT ONLY TO BE INSTALLED & SERVICED BY A SUITABLY QUALIFIED PROFESSIONAL.
3.
THIS MANUAL CONTAINS IMPORTANT INFORMATION. ONCE INSTALLATION IS COMPLETE INSTALLER
MUST PROVIDE THIS MANUAL TO OWNER/OPERATOR TO STORE IN A SAFE PLACE.
Advertisement
Table of Contents
Summary of Contents for Naked NKD-pH
- Page 1 Controller INSTALLATION & STARTUP GUIDE MODEL: NKD-pH NOTE: READ THIS DOCUMENT PRIOR TO INSTALLATION. IMPROPER INSTALLATION WILL VOID WARRANTY. PRODUCT ONLY TO BE INSTALLED & SERVICED BY A SUITABLY QUALIFIED PROFESSIONAL. THIS MANUAL CONTAINS IMPORTANT INFORMATION. ONCE INSTALLATION IS COMPLETE INSTALLER...
-
Page 2: Important - Please Read
The contents of this manual are the exclusive copyright of Naked Pools and may not be reproduced without written © permission. 2021 Whilst every care was taken in preparation of this document, Naked Pools accepts no responsibility for the accuracy of the information supplied. -
Page 3: Tools Required
PH CONTROLLER | PARTS SUMMARY pH Controller with Wall Mount Bracket Wall Plugs & Mounting Screws (x2) Clear Tee with Lock Nut, Injector Valve Drum Weight with Suction Valve c/w Sleeve & Tube Nut Injector O'Ring c/w Tube Nut Clear PVC Flexible Tube (6m) Installation and Start-up Guide Acid Drum Label TOOLS REQUIRED... -
Page 4: Typical System Installation
Pool Pump Before you start: NKD-pH uses a 1 : 3 Acid/Water mix ratio. Add 15L water then 5L of acid to a 20L drum. Always add acid to water, never water to acid. Install the Clear Injection Tee Piece before or after the OXI & ION Cell Housing taking note of the ow direction indicator. -
Page 5: Installation Steps
Unit and then the pump into the piggy back plug. OPERATING THE CONTROLLER The NKD-pH is based on an algorithm and is designed to dose acid into the pool each day based on a preset time in accordance with the pool size entered during the Initial Start-up. -
Page 6: Maintenance
NOTE: WHEN STARTING THE NKD-PH FOR THE FIRST TIME THE ACID PUMP WILL AUTOMATICALLY PRIME WHEN THE INITIAL STARTUP BEGINS OR WHEN T1 IS ACTIVATED. THERE ARE 2 MENUS FOR PH CONTROL pH1 RUN TIME • Adjusts the run time of the acid pump. -
Page 7: Technical Specifications
Before replacing, ensure that the suction and injection tubes are empty. To replace the squeeze tube, please follow the instructions included with the replacement kit, or on the Naked Pools App. Only use original sized commercial grade Tygon® Norprene® tube as incorrect sizing will result in early failure of the Tri Roller Block. - Page 8 SCAN THIS CODE T O G E T T H E NAKED APP! or visit your App Store and search “Naked Pools” Swimming as nature intended™ 1800 625 331 suppor t@naked-pools.com w w w.naked-pools.com...