Wabtec ASMB0878 Hardware Integration Manual

Mini rf tof module nanopan

Advertisement

Quick Links

Digital Mining
Technology
ASMB0878
MINI RF TOF MODULE NANOPAN
HARDWARE INTEGRATION
MANUAL
© 2020 Wabtec Corporation. All rights reserved. The information contained in this publication is the property of Wabtec
Corporation. This publication shall not be reproduced, redistributed, retransmitted, translated, abridged, adapted,
condensed, revised or otherwise modified, in any form, in whole or in part, without the express written consent of
Wabtec.
By accessing this, you agree that the information contained herein does not purport to cover all details or variations in
Wabtec products or to provide for every possible contingency with installation, operation or maintenance. Should further
information be desired, or should particular problems arise that are not covered sufficiently for the user's purposes, the
matter should be referred to Wabtec Corporation. Any applicable Federal, State or local regulations or company safety or
operating rules must take precedence over any information or instructions given in the Technical Documentation. Wabtec
has no obligation to keep the material up to date after the original publication.
WABTEC CORPORATION EXPLICITLY DISCLAIMS ALL WARRANTIES OF ACCURACY, MERCHANTABILITY OR FITNESS FOR ANY
PURPOSE IN CONNECTION WITH THIS PUBLICATION AND USE THEREOF..

Advertisement

Table of Contents
loading

Summary of Contents for Wabtec ASMB0878

  • Page 1 HARDWARE INTEGRATION MANUAL © 2020 Wabtec Corporation. All rights reserved. The information contained in this publication is the property of Wabtec Corporation. This publication shall not be reproduced, redistributed, retransmitted, translated, abridged, adapted, condensed, revised or otherwise modified, in any form, in whole or in part, without the express written consent of Wabtec.
  • Page 2: Table Of Contents

    INDUSTRIE CANADA – DÉCLARATION SUR L’EXPOSITION AUX RADIATIONS ......12 CONFORME AUX NORMES D’INDUSTRIE CANADA ..............12 AU SUJET DES ÉMETTEURS RADIO ..................13 AUSTRALIAN RADIO COMMUNICATIONS EQUIPMENT – RADIATION EXPOSURE STATEMENT ... 13 4.5. ASMB0878 – Hardware Integration Manual Page 2 of 14 Rev: 3...
  • Page 3: Manufacturer Information

    DISCLAIMER These materials are provided for information purposes only, “as is” without express or implied warranty of any kind. Wabtec makes no ANY EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY REGARDING ANY PRODUCTS DESCRIBED in these materials.
  • Page 4: Company Details

    3 Co-Wyn Close Fountaindale, New South Wales, 2258 Australia Telephone +61 2 8863 4730 GETProductionIMT@wabtec.com www.wabteccorp.com Industrea Mining Technology Pty Ltd is a registered business subsidiary of Wabtec Corporation ASMB0878 – Hardware Integration Manual Page 4 of 14 Rev: 3...
  • Page 5: Overview

    2.1. GENERAL FEATURES The ASMB0878 is a digitally controlled “Time of Flight” (ToF) ranging radio module implemented on an industry standard M2.xx style circuit board. This module can use used in a host controller board to provide a short range, power limited UHF radio link for a variety of applications.
  • Page 6: Pin Configuration And Function

    MECH E KEY UART-RXD CMOS RESERVED UART-DSR CMOS RESERVED RESERVED WAKE/#LPMODE CMOS RESERVED SPI-MOSI CMOS RESERVED RESERVED SPI-MISO CMOS(HiZ) RESERVED SPI#SS CMOS RESERVED SPI-SCK CMOS #IRQ CMOS-OD RESERVED RESERVED RESERVED RESERVED ASMB0878 – Hardware Integration Manual Page 6 of 14 Rev: 3...
  • Page 7: Approved Accessories List

    (-40°F) or above 85°C (185°F). This may damage the DEVICE. Do not operate this Module outside specified temperature range. Refer to specification table for further information. ASMB0878 – Hardware Integration Manual Page 7 of 14 Rev: 3...
  • Page 8: General Information

    USA: Dispose of in accordance with local, state and federal laws and regulations. Canada: Dispose of in accordance with local, state and federal laws and regulations. EC: Dispose of in accordance with relevant EC Directives. ASMB0878 – Hardware Integration Manual Page 8 of 14 Rev: 3...
  • Page 9: Authorized Representatives

    Sub Saharan Africa Probe Integrated Mining Technologies Telephone +27 (11) 453 0924 (PTY) Ltd +27 (11) 453 2141 245 Albert Amon Road Meadowdale, Germiston, 1614 www.probebattery.co.za South Africa ASMB0878 – Hardware Integration Manual Page 9 of 14 Rev: 3...
  • Page 10: Product Approvals And Regulatory Information

    PRODUCT APPROVALS AND REGULATORY INFORMATION ASMB0878 module have modular approval and comply with FCC Part 15 and Canada Innovation, Science and Economic Development Canada (ISED) RSS-247 and RSS-Gen. FCC ID: YIY-ASMB0878 8903A-ASMB0878 Modifications to this product without written consent from the manufacturer or its designated authorized representatives could void the user’s authority to operate the equipment.
  • Page 11: Fcc Interference Statement For Class B Devices

    This Class B digital apparatus complies with Canadian ICES-003. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment ASMB0878 – Hardware Integration Manual Page 11 of 14 Rev: 3...
  • Page 12: Concerning Radio Transmitters

    Cet appareil numérique de classe B est conforme à la norme canadienne ICES- 003. Les changements ou les modifications non approuvés expressément par la partie responsable de la conformité pourraient annuler l’autorisation de l’utilisateur de faire fonctionner l’équipement. ASMB0878 – Hardware Integration Manual Page 12 of 14 Rev: 3...
  • Page 13: Au Sujet Des Émetteurs Radio

    Radiation – Human Exposure) Standard 2014 for General Public Exposure, Non- Aware User, for a Compliance Level 2 Radiocommunications Equipment, when the minimum safety distance is adhered to, and shall bear the RCM. ASMB0878 – Hardware Integration Manual Page 13 of 14 Rev: 3...
  • Page 14 By P C Shivalingam at 8:41 pm, Jan 28, 2022 POSITION Design Engineer REVIEWED: DATE By Peter O'Donnell at 4:32 pm, Jan 31, 2022 POSITION Engineering Manager APPROVED: By Steve Clifton at 3:40 pm, Feb 01, 2022 DATE ASMB0878 – Hardware Integration Manual Page 14 of 14 Rev: 3...

Table of Contents