D-Link DAS-3 Series Manual page 3

The following figure shows the front panel connection of DAS-3248:

The following figure shows the rear panel connection of DAS-3248:

Step 1: Connect the ADSL line connector(s), a 50-pin centronic connector, of DAS-

3 Series IP DSLAM to CPE's by using telco cable. Each line connector can

support up to 24 ports of ADSL/ADSL2/2+ for Data path.

Step 2: Connect the phone connector(s), a 50-pin centronic connector, of DAS-3

Series IP DSLAM to Exchange/PBX by using telco cable.

Step 3: Connect to AC power outlet and turn the power switch to "|".

property of their respective holders.

Software and specifications subject to change without notice. D-Link ADSL IP DSLAM.