Download Print this page

Flonidan Uniflo 1200 GVEC Manual

Pulse divider option board
Hide thumbs Also See for Uniflo 1200 GVEC:

Advertisement

Quick Links

Uniflo 1200 GVEC
Accessories
Pulse divider option board
Product number : 0618615-000
Manual
M/06180XX/46
Rev. 28.11.05
Please look at our homepage
www.flonidan.dk
that you have the newest version of the document.

Advertisement

loading

Summary of Contents for Flonidan Uniflo 1200 GVEC

  • Page 1 Uniflo 1200 GVEC Accessories Pulse divider option board Product number : 0618615-000 Manual M/06180XX/46 Rev. 28.11.05 Please look at our homepage www.flonidan.dk that you have the newest version of the document.
  • Page 2: Table Of Contents

    PULSE DIVIDER CONTENT 1.0 Introduction........................3 2.0 Mounting........................3 3.0 Functionality ........................4 3.1 General ..............................4 3.2 Power fail ...............................5 3.3 Max input frequency..........................5 3.4 Diode LED's ............................5 5.0 Technical data......................5 5.1 Dimensions ............................5 5.2 Common specifications..........................6 5.3 Markings..............................6 U:\Hovedbibliotek\Produkter\Standard\Uniflo 1200\2. Kundemappe UK\5_Option board_Pulse in\5.3_Pulse_divider_card\Pulse divider Board.doc Page 2 of 6...
  • Page 3: Introduction

    0618605-000 Uniflo 1200 card, Ex powersup. The Pulse divider cannot be mounted in Hazardous areas. Repair of the unit and replacement of components must be done by Flonidan only. 2.0 Mounting Only technicians who are familiar with the technical terms, warnings, and instructions in the manual and who are able to follow these should connect the module.
  • Page 4: Functionality

    PULSE DIVIDER INPUT meter supply select INPUT / OUTPUT division select INPUT Led OUTPUT - OUTPUT + INPUT - INPUT + Mount the 2 screws and strain relief securely. If it’s a shielded cable then terminate the shield under the strain relief.
  • Page 5: Power Fail

    PULSE DIVIDER Its possible to select a division factor as 1, 10, 100, 1000 or 10000 with a jumper placed on one of the five pin header pairs shown in the picture: 1 / 10000 1 / 1000 1 / 100 1 / 10 1 / 1 3.2 Power fail...
  • Page 6: Common Specifications

    Revision history Rev. Init Comment 23.07.2003 Document created Flonidan DC A/S - Islandsvej 29 - DK-8700 Horsens Tel. +45 75618888 - Fax +45 75626088 - E-mail: mail@flonidan.dk U:\Hovedbibliotek\Produkter\Standard\Uniflo 1200\2. Kundemappe UK\5_Option board_Pulse in\5.3_Pulse_divider_card\Pulse divider Board.doc Page 6 of 6...