Advertisement
Quick Links
Advertisement
Summary of Contents for PondXpert Fountasia 3000
- Page 1 Fountasia 3000 & 4000 Assembly Instructions...
- Page 2 Contents...
- Page 3 Contents Explained Four fountain head attachments Threaded nut to attach T’ piece and fountain stem to fountain stem Fountain pump T’piece Fountain pump unit and three main base attachments Stepped hosetail for 20-32mm pond hose Fountain base connections to enable the T’ piece to be used...
- Page 4 Not using the fountain • The main base unit can be used without a fountain attachment • Choose one of the screw fit attachments as shown on this slide • This will be screwed into the top of the main unit •...
- Page 5 Using the fountain • Screw the attachment nut to the main body of the unit (as shown in picture A) • Attach to the doubled threaded end attachment (as shown in picture B) • This connected piece will then be screwed onto the T’ piece •...
- Page 6 Stepped hosetail • The stepped hosetail is used along side the T’ piece as shown • The stepped hosetail is able to take 20-32mm width pond hosetail • The feed to this stepped hosetail is controlled by the turn valve as highligted...
- Page 7 Fountain Construction • Firstly screw the threaded nut (as shown in pictures A/B) into the T’piece • Next screw the fountain stem onto the unit (as shown in picture C) this can be extended to double its original length if required •...
Need help?
Do you have a question about the Fountasia 3000 and is the answer not in the manual?
Questions and answers