Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TACKLIFE DCM01A
Summary of Contents for TACKLIFE DCM01A
- Page 1 Drain Cleaning Machine Model：DCM01A...
- Page 2 Warranty Registration We are glad to invite to register the warranty information at www.tacklifetools.com.After registration,you may kindly enjoy the exclusive service...
-
Page 3: Safety Symbols
WARNING READ THIS OPERATION MANUAL CAREFULLY BEFORE USING THIS PROD- UCT. FAILURE TO UNDERSTAND AND FOLLOW THE CONTENTS OF THIS MANUAL MAY RESULT IN ELECTRICAL SHOCK,L FIRE, AND/OR SERIOUS PERSONAL INJURY. SAFETY SYMBOLS In this operation manual and on the product, safety symbols and signal words are used to communi- cate important safety information. - Page 4 Electrical safety ● Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed(grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. ● Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refriger- ators.
-
Page 5: Tool Description
PROPER MACHINE OPERATION ● Cleaning chemicals can be present in clogged drains. If you have previously used chemicals or are unsure, take precise care to avoid contact with the cable or debris found in the drain. ● Machine is designed to be used by one person only. The operator must control both the cable and the foot switch. -
Page 6: Preparation For Operation
PREPARATION FOR OPERATION Do not operate a machine that has the belt guard removed, any absent or broken parts, or that is inadequately assembled. If your machine does not meet all of the conditions in this section, do not operate until the machine is properly repaired. Failure to properly prepare for operation may result in shock, fire, and/or serious personal injury or death. -
Page 7: Autofeed Assembly
machine. Move the switch to the REV position to ensure that the drum is rotating clockwise, repeat- ing the previous steps to ensure that the machine is working properly. If the rotation is not correct, do not operate this machine. AUTOFEED ASSEMBLY To reduce the risk of serious injury during use, follow these procedures for proper assembly. -
Page 8: Specification
drum. ONLY run the motor in REV if the cutter has become caught. If the cable begins to get stuck or buckle/kink/twist , immediately remove your foot from the foot switch while firmly holding the cable with both hands. Allow the machine to come to a complete stop and the tension to release from the cable. - Page 9 properly mounted on the machine frame. ● Store machine in a dry, safe, secured place, out of the reach of children and people unfamiliar with this machine. Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
- Page 10 Tel:929-533-7707 Shenzhen Take Tools Co., Ltd. www.tacklifetools.com www.facebook.com/Tacklife.US support@tacklifetools.com No.B714,Niulanqian Building, Minzhi Road, Longhua District, Shenzhen, Guangdong, China 518000...
Need help?
Do you have a question about the DCM01A and is the answer not in the manual?
Questions and answers