Kramer K-Cam4K User Manual
  1. Manuals
  2. Brands
  3. Kramer Manuals
  4. Webcam
  5. K-Cam4K
  6. User manual

Kramer K-Cam4K User Manual

Hide thumbs Also See for K-Cam4K:
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
MODEL:
K-Cam4K
4K PTZ Camera
P/N: 2900-301541 Rev 1
www.kramerAV.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K-Cam4K and is the answer not in the manual?

Questions and answers

Related Manuals for Kramer K-Cam4K

Summary of Contents for Kramer K-Cam4K

  • Page 1 USER MANUAL MODEL: K-Cam4K 4K PTZ Camera P/N: 2900-301541 Rev 1 www.kramerAV.com...

  • Page 2: Table Of Contents

    Kramer Electronics Ltd. Contents Introduction Getting Started Overview Typical Applications Defining K-Cam4K 4K PTZ Camera Mounting K-Cam4K Mounting K-Cam4K Connecting K-Cam4K Connecting to K-Cam4K via RS-232 Operating and Controlling K-Cam4K Controlling Via IR Remote Control Transmitter Operating via the OSD Menu...

  • Page 3: Introduction

    Kramer Electronics Ltd. Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.

  • Page 4: Overview

    European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at www.kramerav.com/il/quality/environment.

  • Page 5: Typical Applications

    • Hybrid video conferencing in meeting rooms. • Recording and broadcasting of classroom and auditorium sessions. Controlling your K-Cam4K Control your K-Cam4K: • By RS-232 serial commands (VISCA protocol) transmitted by a touch screen system, PC, or other serial controller.

  • Page 6: Defining K-Cam4K 4K Ptz Camera

    USB 3.0 Type-B Connector Connect to computer or collaboration device using the USB-3 cable (included). DC 12V Power Connector Connect to the 12V power adapter. ON/OFF Switch Turn the unit on and off. K-Cam4K – Defining K-Cam4K 4K PTZ Camera...

  • Page 7: Mounting K-Cam4K

    Kramer Electronics Ltd. Mounting K-Cam4K This section provides instructions for mounting K-Cam4K. Before installing, verify that the environment is within the recommended range: • Operation temperature – 0 to 40C (32 to 104F). • Storage temperature – -40 to +60C (-40 to +140F).
  • Page 8 (on the bracket) into the tenon (on the camera). 6. Fix the camera by screwing (A) Nickel screw to the center and (B) then tighten with 3 black screws. K-Cam4K is mounted on the wall. K-Cam4K – Mounting K-Cam4K...

  • Page 9: Connecting K-Cam4K

    Kramer Electronics Ltd. Connecting K-Cam4K Always switch off the power to each device before connecting it to your K-Cam4K. After connecting your K-Cam4K, connect its power and then switch on the power to each device. Figure 2: Connecting to the K-Cam4K Rear Panel...

  • Page 10: Connecting To K-Cam4K Via Rs-232

    Kramer Electronics Ltd. Connecting to K-Cam4K via RS-232 You can connect to K-Cam4K via an RS-232 connection using, for example, a PC or an additional camera. Connect the K-Cam4K RS-232 8-pin Min DIN connector to an RS-232 9-pin D-sub serial port,...

  • Page 11: Operating And Controlling K-Cam4K

    The camera is ready for operation. Control K-Cam4K via: • Controlling Via IR Remote Control Transmitter on page 10. • Operating via the OSD Menu on page 12. • Operating via Ethernet on page 16. K-Cam4K – Operating and Controlling K-Cam4K...

  • Page 12: Controlling Via Ir Remote Control Transmitter

    CAMERA SELECT 1 key to this camera. To use the remote to control camera 1 press the CAMERA SELECT 1 key (see Assigning up to 4 K-Cam4K Units to the IR Remote Controller on page Press F4 to freeze the image (see...
  • Page 13 Kramer Electronics Ltd. Assigning up to 4 K-Cam4K Units to the IR Remote Controller You can use one IR remote controller to control several cameras. To do so, you need to assign each device to the remote controller via IR learning.

  • Page 14: Operating Via The Osd Menu

    14. • Setting Digital Noise Reduction Level on page 15. • Defining Setup Parameters on page 15. • Configuring Communication Parameters on page 16. • Restoring to Default Settings on page 16. K-Cam4K – Operating and Controlling K-Cam4K...
  • Page 15 0 to 8. Exposure is configured. Configuring Color Settings K-Cam4K enables configuring color parameters. To adjust the color parameters: 1. On the IR remote press MENU. The menu appears. 2. Use the arrows to select Color. K-Cam4K – Operating and Controlling K-Cam4K...
  • Page 16 Image parameters are adjusted. Setting P/T/Z Parameters K-Cam4K enables configuring pan tilt and zoom parameters. To adjust the P/T/Z parameters: 1. On the IR remote press MENU. The menu appears. 2. Use the arrows to select P/T/Z. K-Cam4K – Operating and Controlling K-Cam4K...
  • Page 17 HDMI or SDI. Auto Flip Set to On, for automatic flip of the view. USB Audio Set to On or Off. OSD Flip Set flipping the OSD to On or Off. Setup parameters are defined. K-Cam4K – Operating and Controlling K-Cam4K...

  • Page 18: Operating Via Ethernet

    Ethernet Port via a Network Hub on page 19) Note: If you want to connect via a router and your IT system is based on IPv6, speak to your IT department for specific installation instructions. K-Cam4K – Operating and Controlling K-Cam4K...
  • Page 19 4. Highlight either Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) depending on the requirements of your IT system. 5. Click Properties. The Internet Protocol Properties window relevant to your IT system appears as shown in Figure 4 Figure K-Cam4K – Operating and Controlling K-Cam4K...
  • Page 20 6. Select Use the following IP Address for static IP addressing and fill in the details as shown in Figure For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to 192.168.1.255 (excluding 192.168.1.39) that is provided by your IT department. K-Cam4K – Operating and Controlling K-Cam4K...
  • Page 21 You can connect the Ethernet port of K-Cam4K to the Ethernet port on a network hub or using a straight-through cable with RJ-45 connectors. Configuring Ethernet Port You can set the Ethernet parameters via the embedded Web pages. K-Cam4K – Operating and Controlling K-Cam4K...

  • Page 22: Using Embedded Web Pages

    Configure Video Settings on page 24. • Defining Audio Parameters on page 26. • Defining General System Parameters on page 27. • Configure Network Settings on page 28. • Viewing Device Information on page 29. K-Cam4K – Using Embedded Web Pages...

  • Page 23: Changing Interface Language

    Changing the Language To change the interface language: 1. On the lower left side open the drop-down box. 2. Select the required language (English, Chinese or Russian). The window refreshes. Language interface has changed. K-Cam4K – Using Embedded Web Pages...

  • Page 24: Navigating K-Cam4K In Real Time

    4. Click Set. 5. Click Call to recall the preset. Preset is saved/recalled. Controlling via the OSD Menu To control K-Cam4K via the OSD, from the embedded webpages: 1. Access the embedded webpages (see Browsing the K-Cam4K Webpages on page 21).

  • Page 25: Viewing Live Preview

    Double-click the viewing pane to toggle between full-screen view and normal view. ▪ Click play or pause buttons to pause or play live view. ▪ Click square brackets on the right for full view. ▪ Click mute/unmute icon to mute or unmute the audio. K-Cam4K – Using Embedded Web Pages...

  • Page 26: Configure Video Settings

    Set video format to OSD (meaning that you can set the video HDMI output format, such as 4K30, via the OSD menu settings of the camera), 50Hz (PAL) or 60Hz (NTSC). ▪ Set encoding level to mainprofile or highprofile. K-Cam4K – Using Embedded Web Pages...
  • Page 27 CBR (Constant Bit Rate): Video coder is coding according to preset speed. VBR (Variable Bit Rate): Video coder adjusts the speed based on preset speed to gain the best image quality. 5. Click Submit. Video settings are defined. K-Cam4K – Using Embedded Web Pages...

  • Page 28: Defining Audio Parameters

    Bit Rate: 96K or 128K. ▪ Input Type: LINE IN. ▪ Input Vol: select the volume from the drop-down box. ▪ ADTS Options (Audio Data Transport Stream): On or Off. 4. Click Submit. Audio parameters are set. K-Cam4K – Using Embedded Web Pages...

  • Page 29: Defining General System Parameters

    Note that when accessing as guest, you can view the local preview, select the presets and control camera motion and so on, access is denied to audio and video settings, as well as Network settings. 6. Click Submit. System settings are defined. K-Cam4K – Using Embedded Web Pages...

  • Page 30: Configure Network Settings

    3. Define LAN settings. ▪ Define a fixed IP address (static IP) or a Dynamic IP address (DHCP). ▪ Set the IP Address (default: 192.168.1.39), Gateway, Subnet Mask and DNS address. ▪ View the MAC Address K-Cam4K – Using Embedded Web Pages...

  • Page 31: Viewing Device Information

    21). The Live page appears (see Figure 2. Select the Information page. The Information page appears. Figure 13: Information Page 3. View the Information. 4. If requires change the device ID. 5. Click Submit. K-Cam4K – Using Embedded Web Pages...

  • Page 32: Upgrading Firmware

    Kramer Electronics Ltd. Upgrading Firmware Contact Tech support if you need to upgrade the firmware (support@kramerav.com). K-Cam4K – Upgrading Firmware...

  • Page 33: Technical Specifications

    Operating System Windows 7, Windows 8, Windows 10, Mac OS X, Linux, Android Color System / Compression YUY2 / MJPEG / H.264 / H.265 USB Audio Support USB Video Communication UVC 1.1~1.5 Protocol UVC PTZ Support K-Cam4K – Technical Specifications...
  • Page 34 1.42kg (3.1lbs) approx. Shipping Weight 3.35kg (7.4lbs) approx. Accessories Included Power adapter and cord, IR remote control transmitter, 1 USB 3.0 cable, wall bracket kit, lens cover Specifications are subject to change without notice at www.kramerav.com K-Cam4K – Technical Specifications...

  • Page 35: Default Communication Parameters

    192.168.100.88 Subnet mask: 255.255.0.0 Default gateway: 192.168.1.2 Default username: admin Default password: admin Full Factory Reset Go to: Menu-> RESTORE DEFAULT -> confirm Reset button Press the RESET button for 5 seconds to reset the machine K-Cam4K – Technical Specifications...
  • Page 36 This limited warranty gives you specific legal rights, and you may have other rights which vary from country to country or state to state. This limited warranty is void if (i) the label bearing the serial number of this product has been removed or defaced, (ii) the product is not distributed by Kramer Electronics or (iii) this product is not purchased from an authorized Kramer Electronics reseller.
  • Page 37 SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our website where updates to this user manual may be found. We welcome your questions, comments, and feedback.

Table of Contents