Dualit ARCHITECT 16049 Instruction Manual

Kettle panels
Instruction manual
CAUTION! Edges may be sharp. Use and clean with care.
1 UNPLUG
Unplug and empty the kettle.
Ensure it has cooled down to
room temperature. Risk of
scalding and electric shock.
4 BODY PANELS
Align the new panel with the
screw holes on the body of the
kettle and tighten the first screw.
Dualit Limited County Oak Way Crawley West Sussex RH11 7ST
+44(0)1293 652 500 info@dualit.com www.dualit.com
2
UNSCREW
Using a Phillips screw driver (PH2),
unscrew and remove the lid and
body panels.
NB. Do not operate the kettle
with the panels removed.
5
LOCATE PANEL
Ensure panel is fully located
into recess.
3 LID PANEL
Align the new panel with the
screw holes on the lid of the
kettle. Loosely screw both
screws into position. Tighten
to secure.
TIGHTEN
6
Align and tighten the second
screw.