Safety Instructions - Cisco Catalyst 9130AX Series Getting Started Manual

Cisco Catalyst 9130AX Series Access Points
Table 1 List of External Antennas Supported on C9130AXE
Part Number
AIR-ANT2566P4W-R=
AIR-ANT2566P4W-RS=
Note When using the breakout cables and connecting to legacy dual band antennas, the BLE radio will experience
the gain of that antenna at 2.4 GH z.
Cisco also provides the following external antenna accessories:

2 ft Smart Antenna Connector to RP-TNC breakout cable (AIR-CAB002-D8-R=)—For conventional (non-DART)
antennas with gains up to 6 dBi

3 ft Smart Antenna Connector to N Connectors (AIR-CAB003-D8-N=)—For conventional (non-DART) antennas with
gains up to 13 dBi

Antenna bracket (AIR-AP-BRACKET-9=)—To mount the C9130AXE directly to the back of the C-ANT9103= antenna
3

Safety Instructions

Translated versions of the following safety warnings are provided in the translated safety warnings document that is
shipped with your access point. The translated warnings are also in the Translated Safety Warnings for Cisco Catalyst
Access Points, which is available on Cisco.com.
W arning IM PORTAN T SAFETY IN STRUCTION S
This w arning symbol means danger. You are in a situation that could cause bodily injury. Before you
w ork on any equipment, be aw are of the hazards involved w ith electrical circuitry and be familiar w ith
standard practices for preventing accidents. Use the statement number provided at the end of each
w arning to locate its translation in the translated safety w arnings that accompanied this device.
SAVE THESE IN STRUCTION S Statement 1071
W arning Read the installation instructions before using, installing or connecting the system to the pow er source.
Statement 1004
Description
Directional Antenna, 4-port, with RP-TNC
connectors.
Note
Connect to AP using AIR-CAB002-D8-R=.
Directional Self-Identifying Antenna, 4-port, with
RP-TNC connectors.
Note
Connect to AP using AIR-CAB002-D8-R=.
7
Gain
6 dBi (2.4 GHz)
6 dBi (5 GHz)
6 dBi (2.4 GHz)
6 dBi (5 GHz)