Advertisement

Quick Links

JS-TB297 12'TONEARM
USER
S MANUAL
'

Advertisement

Table of Contents
loading

Summary of Contents for Jasmine JS-TB297

  • Page 1 JS-TB297 12’TONEARM USER S MANUAL ’...
  • Page 2 Important Precautions Be sure to adjust the tracking force to less than 2.0g  before setting the cartridge, to avoid damaging the stylus! When installing the tonearm, please handle it gently  to avoid breaking the arm wire! - 2 -...
  • Page 3: Table Of Contents

    CONTENTS Important Precautions Introduction The brief of Jasmine Audio The design concept of Jasmine Audio Installation Unpacking Packing list Arm base installation Connection of tonearm cable Install a cartridge JS-TB297 Specification Warranty - 3 -...
  • Page 4: Introduction

    Since 2008, we have independently designed and produced products with Jasmine brand. Jasmine has won many awards both in China and abroad due to its high reputation in the international market. Jasmine design and produce HIFI level audio products. It is our unswerving goal to bring wonderful music enjoyment to users.
  • Page 5: Installation

    Installation This section describes how to install the Jasmine JS-TB297 tonearm Unpacking After you receive the Jasmine JS-TB297 tonearm, please open the box to check whether the product appearance has obvious deformation and damage. If yes, please do not install the product, contact your seller or agent in time to inform the problems and ask for the after-sales service.
  • Page 6: Arm Base Installation

    1. Open holes for arm base Please open holes for JS-TB297 arm base at the 297mm mounting distance according to the size in the figure below, and install the arm base equipped with the arm.
  • Page 7 2. Setting mounting distance and VTA Tonearm cable connection Please refer to the following picture to insert the arm cable connector in place ! - 7 -...
  • Page 8: Install A Cartridge

    Install a cartridge JS-TB297 tonearm is specially equipped with a protractor to set the cartridge. As shown as the figure below: Step 1: first, put the protractor into the central pillar of the turntable, and rotate the protractor until the line "pointing to the arm pivot" is aligned with the arm pivot center.
  • Page 9 Step 4: adjust the horizontal and vertical azimuth angles of the cartridge so that the bottom edge of the cartridge is parallel to the protractor surface, and the two sides are parallel to the vertical line of the null point matrix. Step 5: VTA adjustment.
  • Page 10 5, max. 17 g Effective mass : 5 g (without headshell ) Total weight : 579 g Packing Size : 41.7*18.5*18.5mm Packing Weight : 1.47 Kg Copyright@Jasmine Aud i o, 2020 Subject to change without notice. - 10 -...
  • Page 11: Warranty

    Warranty Card ● Thank you and congratulations on your purchase from Jasmine Audio ● We will confirm your purchase certificate and provide warranty service according to the warranty terms. Please keep this warranty card properly. ● Please show the warranty card when applying for maintenance service.

Table of Contents