OrienTek TFM-200 Operation Instruction

TFM-200 Handheld Fiber Microscope Operation instruction
Product description
The hand-held fiber optic microscope is a fiber end face
detector. With its high-end optics, it can quickly manually focus
and detect scratches, dirt, and dust on the fiber end face. The
product supports UPC's SC, FC, ST, LC male heads, with good
optical performance and integrated laser safety filter, whether it
is tested on the production line or on-site, allowing your
technicians to quickly find scratches, fiber end dirt.
4
1
Eyepiece: Optical fiber end face viewing window
2
Battery cover: unscrew to put the battery
3
Switch: Two different lighting modes can be selected
4
Adapter interface: including 1.25 mm and 2.5 mm
universal adapters
5
Focus knob: adjust the focus of the knob to check the
clarity of the fiber end face
Two lighting modes
Toggle "|" to jump to the axial
illumination, toggle "||" to jump
to the side illumination, and
toggle "o" to directly turn off.
Battery cover
5
1
3
2
X
Fiber Connector Microscope
200
TFM-200
X
Fiber Connector Microscope
200
TFM-200
The first step is to unscrew the
battery cover, and the second
step is to put the battery in, and
the battery can be replaced and
used in time.
Eyepiece viewing
Holding the fiber optic
microscope with one hand,
aiming at the eyepiece with a
single eye, you can accurately
check whether the fiber end
face needs to be cleaned.
Ocus knob
Universal adapter
Universal adapter
interface, respectively 1.25mm
and 2.5mm is appropriate
interfaces Orchestration.
X
Fiber Connector Microscope
200
TFM-200
X
Fiber Connector Microscope 200
TFM-200
Align the eyepiece and
adjust the focal length of the
knob to clearly check the degree
of dirt on the end face.
X
Fiber Connector Microscope
200
TFM-200