Advertisement
1. INPUT: 1/4" phone jack input.
2. DIST. sw: Engaging this switch will activate the onboard distortion circuit for
Guitar input signal.
3. DISTORTION - GAIN: This adjusts the gain (level of overdrive distortion.) when
using the distortion channel.
4. BASS: This controls the low register.
5. TREBLE: This controls the high register.
6. VOLUME: This controls the output level.
7. POWER: This is the ON/OFF switch for the power supply.
The LED lights when the power supply is turned on.
Warning: Before you turn on the power of the amp, make sure that volume
control is set to "0". If you turn on the power when the volume controls are
already raised, a sudden loud noise may be produced, possibly damaging your
bearing. Please use caution.
8. DC IN JACK: This is the jack to which the AC adaptor is connected.
9. VOLUME (HEAD PHONES): This controls the output level.
10. OUTPUT (HEAD PHONES): This is a 3.5mm stereo headphones. The sound is
not reproduced through the built-in speaker when headphones are in use.
WARNING
This phones output produces a large volume of sound. Ensure that the volume has
been turned down before beginning to play using the headphones, and then slowly
increase the volume until it has reached the desired level. Note that the noise and
distorted sound signals produced when inserting or removing the headphone
plug at heigh volume levels will result in damage to the headphones and to the
user's hearing.
TROUBLESHOOTING
1. The power supply cannot be switched on.
• Check that the power cable has been connected correctly.
• Try plugging it into a different socket and see if the same problem occurs.
2. The power supply can be switched on, but no sound is produced.
• Check that the guitar has been connected correctly.
• Remove the effects between the guitar and the amplifier and check to see if no
sound is produced.
• Replace the shielded cable and check to see if no sound is produced.
4
www.PyleUSA.com
• Check to see if the volume on the guitar is set to 'O' .
• Use a different guitar and see if no sound is produced.
• Check to see if the volume on the amplifier is set to 'O' .
• Check to see if the headphones are connected.
3. Noise is heard.
• Check to see if anything in the immediate vicinity is resonating or banging
against the ampli er to produce the noise.
• Check to see if the plug cover on the shielded cable is loose.
• Check that the string action (distance between strings and frets) is correctly
adjusted (not too low).
• Use another guitar, effects and cable to see if the same noise is produced.
4. No sound is produced in the headphones.
• Check that the headphone jack is connected correctly.
• Connect another set of headphones and see if sound is produced.
In the case of defects
This product has passed exhaustive inspections before being shipped from the
factory, ensure that the above procedures are carried out when a problem is thought
to exist. Contact your dealer in the unlikely event that an abnormality occurs during
use. Also, ensure that the symptoms of the problem are explained in detail when
requesting repair in order to facilitate swift handling.
Features:
• Heavy Duty Wood Construction
• 5'' High-De nition Speaker
• Volume, Bass, and Treble Controls
• 3. 55mm Headphone Jack
• Power On/O Switch w/ LED Indicator
• Specially Designed for Enhanced High-Frequency Response
• Functions: Input, Drive Switch, Volume, Treble, Bass, Headphone Output
• Portable and Lightweight for Easy Transport
• Includes Headphone Output for Silent Practice
Technical Specs:
• Power Supply: 10 Watts
• Power Output: AC110V/220V Switchable
• Construction Materials: Lightweight Plywood, Coated by High-Quality Leather
• Product Dimensions (L x W x H): 9.25'' x 5.07'' x 8.46'' –inches
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
5
www.PyleUSA.com
Advertisement
