Isotek Alpha Lite Installation Instructions

Alpha Lite
INSTALLATION INSTRUCTIONS
a

SAFETY FIRST

PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE INSTALLATION
DO NOTexpose this product to dripping or splashing and no objects filled with liquids, such as vases,
should be placed near the apparatus. If liquid enters the chassis immediately unplug from the wall
socket.
DO NOT impede ventilation by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc.;
DO NOT expose this product to naked flame sources, such as lighted candles, these should not be placed
near the apparatus;
MAKE SURE that this appliance (CLASS 1) is connected to a mains outlet socket with protective earth.
PLEASE NOTE that the mains plug is used as the disconnect device and must remain readily operable.

OUTPUT SOCKETS

ADDITIONAL INFORMATION ON FUSING AND RATINGS

A
The eight output sockets marked 'A' are designed for use with all electrical appliances. These
are protected by 10A fusing, located on the back panel and will provide a maximum continous
total load for all eight sockets together (A) of 2300W.
SERVICE & REPAIR
NO USER SERVICEABLE PARTS INSIDE
Should the unit fail, or cease to function, or function in a manner which seems unusual,
please immediately turn off and unplug from the mains supply.
Send an email to: support@isoteksystems.com
Serial No.:
A