1. OVERVIEW • The ASPIRE Inline Weigh Scale allows for an accurate weight measurement to be taken by a carer when a patient is suspended in a sling. • The ASPIRE Inline Weigh Scale has been tested to hold a maximum Safe Working Load (SWL) of 320kg.
Descprition carer or attendant. The ASPIRE Inline Weigh Scale should ONLY be used with Aidacare approved patient slings & lifters, which have been chosen and assessed by a competent trained health professional. For a complete list of all compliant lifting slings and patient lifters, please contact Aidacare on 1300 133 120.
4. ASSEMBLY Insert and connect 9V battery into weigh scale. Assemble the weigh scale as shown below. Note that items marked ‘X’ are retained from Step 2. Remove the Spreader Bar (S) from lifter boom (B) and retain items marked ‘X’. WARNING! For normal assembly: ensure the latch from spreader bar is installed on the opposite side to the top split ring.
5. PRELIMINARY CHECKS After installing the ASPIRE Inline Weigh Scale as per 4. Assembly, these checks should be completed prior to initially using the weigh scale: Check scale is mounted safely and securely. Check that the battery has sufficient charge. If battery symbol appears on screen, battery needs to be replaced.
As needed, wipe scale gently, using mild soap or a mild disinfectant. AIDACARE cannot be held responsible for any personal injury, damage to the weigh scale or damage to NOTICE: DO NOT wash under water pressure or steam clean. DO NOT use property as a result of the improper or unsafe use of the product.
Need help?
Do you have a question about the ASPIRE LSS390680 and is the answer not in the manual?
Questions and answers