Seima OROS 550 Installation And Care Manual

Looking after your Arqstone sink

Arqstone engineered stone is exceptionally strong, durable and easy to clean.
Arqstone sinks are designed for normal domestic use. Follow these guidelines to keep your Arqstone
sink looking beautiful.
Avoid placing hot pans or objects directly onto the sink. Instead, use a wooden board, stainless
−
steel rollout mat or other device to protect the sink.
Do not use the sink as a cutting surface. Use a cutting board instead.
−
Avoid any strong chemical agents from coming into contact with the sink surface.
−
Do not use abrasive cleaners or cleaning pads on the sink.
−
Avoid leaving any strongly coloured substances (such as coffee, tea, red wine, vegetable juice etc)
−
on the sink surface.
Do not throw cutlery or other hard or pointed objects onto the sink surface, as this can damage
−
the sink.

How to clean your Arqstone sink

For everyday cleaning, use warm water, liquid detergent and a soft cloth. Do not use abrasive
−
cleaners or chemicals.
Spillages of strongly coloured substances (eg coffee, red wine, vegetable juice etc) should be
−
wiped up straight away.
For further care and cleaning guidelines, refer to seima.com.au/support
−

Butler sink installation

1
Ensure that the surface to be siliconed, where the sink will be located,
is cleaned and free of grease. Ensure that the surface is level.
Apply a neat line of silicone as shown and position the sink in place.
Allow time for the silicone to cure before using the sink.
IMPORTANT ! Use silicone sealant. DO NOT USE EPOXY TYPE ADHESIVES. Use of epoxy adhesives will void the warranty.
Arqstone sinks
Installation and care guide
2
Please note:
Butler sinks can be
installed in a number
of ways. The most
common is under
the benchtop with
the sink extending
beyond the front of
the cupboards.
Sinks can also be
installed level with
the benchtop,
or even above
benchtop level.
arqstone-in | v 1.0 | page 1 of 2