We recommend seeking a registered electrician's advice before any installation work begins. King Pigeon Hi-Tech Co., Ltd. and its employees and distributors are not responsible for any loss or damage (including damages) resulting from any reliance on any of the contents of this manual.
6.Power input terminal 3.Fiber optic port 7.Ventilation hole 4.Ethernet port(RJ45) LED Indicator Power LED on shows the power is on and normal Fiber optical port indicator, will flash after connection Page 4 of 9 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0...
Ethernet switch N40/N41 10/100/1000Base-T(X) Ethernet Port support auto MDI/MDI-X.User can build the connection between RJ45 port of switch and other Ethernet terminal devices via cable (direct or cross connection). RJ45 pin assignment is as below: Page 5 of 9 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0...
Page 6
LC port: LC port is similar to SC port, but smaller than SC port; it adopts modular jack, easy to operate. ST port: ST port is a clip-on round port. Page 6 of 9 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0...
●When the device is ready to power on, please make sure the voltage input is wide voltage range, and the positive/negative anodes of the power. ●To avoid the electric shock, make sure the device is in good ground connection when operating. Page 7 of 9 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0...
2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the Operating Instructions. In no event shall the manufacturer be liable for any alarm system altered by purchasers. The End! Any questions please help to contact us feel free. Page 8 of 9 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0...
Page 9
Industrial Ethernet Switch Http://www.IOT-Solution.com Page 9 of 9 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0...
Need help?
Do you have a question about the N40 Series and is the answer not in the manual?
Questions and answers