Table of Contents
Related Manuals for AMP Lighting VAC-HS-6718-YMP
Summary of Contents for AMP Lighting VAC-HS-6718-YMP
- Page 1 Low Voltage Landscape Lighting ® 18” Hardscape Mounting Bracket - Stainless Steel ® VAC-HS-6718-YMP Help Hotline: 1-813-978-3900 • Mon-Fri 9am-6pm (EST) w w w. a m p l i g h t i n g . c o m - 1 -...
- Page 2 INSTALLATION & MAINTENANCE GUIDE 18” Hardscape Mounting Bracket - Stainless Steel ® VAC-HS-6718-YMP Important Safety Instructions: Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
- Page 3 INSTALLATION & MAINTENANCE GUIDE 18” Hardscape Mounting Bracket - Stainless Steel ® VAC-HS-6718-YMP Optional: Install Glare Guard Before Installation If you choose, you can attach the Screw glare guard first before mounting Washer the fixture. Use the screws and washers to secure the glare guard onto the fixture.
- Page 4 INSTALLATION & MAINTENANCE GUIDE 18” Hardscape Mounting Bracket - Stainless Steel ® VAC-HS-6718-YMP Install Riser Pass the supply wire from the luminaire through the center Luminaire hole on the Y bracket and the riser. Then thread the riser onto the Y bracket and hand tighten until snug.
- Page 5 INSTALLATION & MAINTENANCE GUIDE 18” Hardscape Mounting Bracket - Stainless Steel ® VAC-HS-6718-YMP Install Riser to Stake Clear away area in the ground at wireway slot on the top of the stake. Pass the fixture supply wire through the center hole of the stake and lay it into the wireway slots.
- Page 6 INSTALLATION & MAINTENANCE GUIDE 18” Hardscape Mounting Bracket - Stainless Steel ® VAC-HS-6718-YMP Adjust Lamp Direction Set Screw Allen Wrench Set Screw Lamp Using an Allen wrench, loosen the set screws on the ends of the lamp and then rotate the lamp to the desired direction. Always tighten the set screws after adjustments.
- Page 7 INSTALLATION & MAINTENANCE GUIDE 18” Hardscape Mounting Bracket - Stainless Steel ® VAC-HS-6718-YMP customersupport@amplighting.com • 813.978.3900 - 7 -...
- Page 8 Help Hotline: 1-813-978-3900 • Mon-Fri 9am-6pm (EST) Specifications and product details subject to change without notice. © Copyright 2021, AMP Lighting, Lutz FL USA 33549 • All rights reserved. ® customersupport@amplighting.com • 813.978.3900 - 8 -...
Need help?
Do you have a question about the VAC-HS-6718-YMP and is the answer not in the manual?
Questions and answers