Philips VTR6200 User Manual page 56

On this interface, press " " or " " to set time. Press " " or
" " to select hour and minute; press"+" or "-"to change the
relevant numbers.
Duration:
From the "Record Timer" Menu select "Duration", then
press MENU button to enter "Duration" Menu. You can set
the recording duration to 30, 60, 120 minutes or infinite. The
system default Duration is infinite. The recording duration
setting as follows:
Record source:
From the "Record Timer" Menu select "Record source", then
press MENU button to enter "Record source" Menu. You
can choose microphone or radio channel as sound source.
Press "+" and "-" to select. The system default sound source
is microphone. For choosing sound source please refer to the
below picture:
56 EN
If choose the radio channel as a REC source and there are
saved channels in the system, the below interface will show; if
there's no saved radio channel in the system, the system will
notify that no saved channel available, and set the channel at
94.2MHZ as default.
Channel 1 is saved channel, channel 2, channel 3,channel
4 ,channel 5 and channel 6 are not saved channels. Select
the one you want to record, then press MENU button to
confirm.