Download Print this page

Matco Tools MFL4500 Instruction Manual page 2

Rechargeable floodlight

Advertisement

SAFETY INFORMATION
• Follow workshop health & safety rules,
regulations and conditions when using the
rechargeable floodlight.
• When not in use, rechargeable floodlight
should be stored in a dry location to inhibit
rust.
• During their period of use, accessories must be
checked for wear, cracks and other damage,
replace any damaged or worn parts.
• Use genuine parts only. Unauthorized parts
may be dangerous and will void the warranty.
• Keep the rechargeable floodlight clean and
in good working order for best and safest
performance.
• DO NOT use the rechargeable floodlight in the
immediate vicinity of inflammable materials
or gases.
• DO NOT point the rechargeable floodlight
directly in your own or any other person's or
animal's eyes.
• DO NOT drop, throw or abuse the
rechargeable floodlight.
• Eyes protection: Wear a protective mask or
protective eyewear.
• Check that the product has not suffered any
damage during transport or storage. Clean and
remove any dust or residual packing material.
• Read the instructions carefully before using
rechargeable floodlight and keep them for
further reference.
WARNING!
• DO NOT immerse rechargeable floodlight in
water.
• DO NOT place rechargeable floodlight near a
fire or any other source of intense heat.
• DO NOT attempt to open, disassemble, modify
or service the rechargeable floodlight.
• DO NOT expose rechargeable floodlight to
temperatures above 40˚C (104˚F).
• DO NOT use rechargeable floodlight if you
suspect that the batteries or the casing is
damaged.
TROUBLESHOOTING
PROBLEM
The floodlight has low lumen output or does not work
If the floodlight still doesn't work
DISPOSAL
The components or the used products must be given to companies that specialize in the disposal and
recycling of industrial waste.
2
PACKAGE CONTENT
Duo-Play Super Power Rechargeable Floodlight
Charger
O.I.P.M.
OPERATING INSTALLATION
1. Fully charge the battery before the first use.
To charge, remove the battery from the light
by tilting the light and sliding the battery out
while pressing the button on the battery.
2. Now connect the battery to the power source
with the help of charger provided with it.
3. While charging, the green LED charge
indicators at the top of the battery, near the
power button, will blink continuously.
4. When the battery is fully charged, all the
indicator LEDs will turn green. Full charging
takes about 4-5 hours.
5. Slide back the battery into the light again till a
click sound is heard.
6. Press the power button located at the top of
the light
• Once for 750 lumens (25% intensity)
• Twice for 1500 lumens (50% intensity)
• Three times for 3000 lumens (75% intensity)
• Four times for 4500 lumens (100% intensity)
• Five times for switching "OFF" the light.
7. *To mount the floodlight on the tripod remove
the screw from the top of the tripod. Place
the floodlight on the tripod and align the
centre hole of the base of the floodlight to the
hole on the top of the tripod. Now secure the
assembly using the screw.
MAINTENANCE
• Always use the charger provided with the
floodlight for charging.
• Clean any dirt from the housing or the lens
immediately, since it could cause overheating.
• If required, clean with a dry or slightly moist,
clean cloth and a mild detergent. Do not use
cleaners that contain abrasives or solvents.
• Fully charge the floodlight before storing it for
a long time.
• When not in use, floodlight should be stored in
a dry location.
POSSIBLE CAUSE
Low battery
DESCRIPTION
CORRECTIVE ACTION
Recharge the battery
Contact nearest authorized service dealer
QTY.
1
1
1

Advertisement

loading