Advertisement
Table of Contents
ConvaQuip Ind., Inc.
Model 724A:
CAUTION: Make sure toilet seat ring is firmly in the down posi on and res ng against the top
of the frame in order to prevent pinching skin. Once seat ring is in place, slowly lower yourself
into a si ng posi on. Keep hands and fingers on the armrests while lowering into posi on.
CAUTION: Posi on the bedside commode against a wall prior to use. The tubular back needs to
be touching the wall when entering or exi ng the bedside commode to prevent pping.
Cleaning Instructions:
* For infection control, clean all parts with one part bleach and 9
parts water. Rinse and allow to air dry or wipe with a clean, dry
cloth.
* Clean rubber tips with alcohol to remove oil, grime and dirt
* Pail may be steam cleaned or use Beaucoup disinfectant
(made by EcoLab) or equivalent.
Manual
for
Model 724A
Bedside Commode
Capacity 750 lbs.
Advertisement
Table of Contents
Related Manuals for ConvaQuip 724A
Summary of Contents for ConvaQuip 724A
- Page 1 ConvaQuip Ind., Inc. Manual Model 724A Bedside Commode Capacity 750 lbs. Model 724A: CAUTION: Make sure toilet seat ring is firmly in the down posi on and res ng against the top of the frame in order to prevent pinching skin. Once seat ring is in place, slowly lower yourself into a si ng posi on.
- Page 2 ConvaQuip Ind., Inc. Assembly Model 724A Bedside Commode Bottom Half Top Half Set top half on bottom half. Close up of tubing resting on snap button. Slide down over the tubing until the tubing will rest on all four snap buttons.
Need help?
Do you have a question about the 724A and is the answer not in the manual?
Questions and answers