Advertisement
Available languages
Available languages
Table of Contents
H
UDSON
LIGHTING
Thank you for purchasing our lighting
fixture.
Please clean with a soft, dry cloth ONLY!
Do not use cleansers.
www.hudsonvalleylighting.com
V
ALLEY
IMPORTANT:
Always unplug the power before installing or replacing bulb
and before cleaning or other maintenance.
INSTALLATION
1. Remove the table lamp and parts bag(s) from the carton. Before
discarding the carton, double check packing to make certain that all
parts are found.
2. Insert the harp onto the saddle.
3. Install the lamp. L1027 is rated for 75 watt type A lamp; L1029 is
rated for 100 watt type A lamp
DO NOT EXCEED RECOMMENDED WATTAGE !
4. Carefully remove protective cover on the shade.
the harp, and secure with finial.
5.
Plug cord into wall outlet. Dimmer switch on socket.
6. Restore power to circuit at breaker or fuse box.
L1027, L1029
Place shade on
Advertisement
Table of Contents
Related Manuals for hudson valley L1027
Summary of Contents for hudson valley L1027
- Page 1 1. Remove the table lamp and parts bag(s) from the carton. Before discarding the carton, double check packing to make certain that all parts are found. 2. Insert the harp onto the saddle. 3. Install the lamp. L1027 is rated for 75 watt type A lamp; L1029 is UDSON ALLEY LIGHTING...
- Page 2 2. Insérer la harpe au support. Fiche 3. Installer l’ampoule. L1027 est conçu pour recevoir une ampoule de 75 watt de type A. L1029 est conçu pour recevoir une ampoule de 100 watt de type A NE PAS DÉPASSER CETTE TENSION RECOMMANDÉE! 4.
Need help?
Do you have a question about the L1027 and is the answer not in the manual?
Questions and answers