Telect WaveTrax 027-2000-4264 Installation Manual

WaveTrax
027-2000-4264 :: 2" Express Off-Ramp Assembly
Installation Guide
Overview
Telect's 2" Express Off-Ramp Assembly is a Telect WaveTrax
Cable Management System component that allows fiber cable
to exit anywhere along a fiber cable management trough. Model
027-2000-4264 fits all 4" through 12" Telect troughs.
The Telect 2" Express Off-Ramp package contains the Express
Off-Ramp, an Express Off-Ramp bracket, and all of the hardware
required to secure the assembly to a Telect horizontal trough. In
addition, the necessary hardware for attaching 2" CableLinks or
split tube vertical runs are included.
Installing Express Off-Ramp Assembly on a Telect Trough
1. Slip assembly over trough
2. Then screw in two captive thread-forming screws.
Installing Telect 2X2 CableLinks to
Express Off-Ramp
CableLink
(P/N 027-0000-4200)
© Telect, Inc., All Rights Reserved. 129008-1 A0
509.926.6000 :: telect.com
®
Installing Telect 2" Flex Tubing to
Express Off-Ramp
Telect trough
(4" deep by 4", 6", 8", or 12" wide,
in 5' or 6' lengths.)
20' Tube
(P/N 027-2902-0020)
1
Installing an Express Off-Ramp
assembly to a non-compatible
trough—or a mid-span on a
compatible trough—requires a Telect
bracket.
Telect bracket attached to a rail
(P/N 027-1000-4004)
Installing Telect 2" Flex Tubing to
Express Off-Ramp with Optional
Split-Tube Bracket
(Bracket sold separately.)
Tube Clamp
(P/N 027-1000-4290)