Subscribe to Our Youtube Channel
Summary of Contents for Picomed ER2AC
- Page 1 Environmental Control Documentation for Picomed ER2AC and ER4AC IR-receivers with 2 and 4 channels Brokelandsheia, 4993 Sundebru, Tlf +47 3711 9950 Fax +47 3711 9951 E-mail: firmapost@picomed.no Foretaksnr 962 211 631 MVA...
-
Page 2: Table Of Contents
Documentation ER2AC and ER4AC IR-receiver Versions Date Made by Comment 210205 Bent-Håvard Sollid English version, based on Norwegian version 0303. Table of contents User manual ........................3 1.1 Water, humidity and cleaning..................3 1.2 Cleaning..........................3 1.3 Malfunctioning .......................3 Technical documentation....................3 2.1 Periodically maintenance....................3 2.2 Mounting ........................3... -
Page 3: User Manual
IR-signals to reach it, and it should not be exposed for direct sunlight. 1.1 Water, humidity and cleaning Picomed ER2AC and ER4AC is ment for indoor use. Do not spell liquids on the receiver while it can destroy it. -
Page 4: Electrical Connections
2.3 Programming The ER2AC and ER4AC IR-receiver can be programmed by the 2 push-buttons next to the LED on the PCB. It is also possible to use these buttons in combination with a preprogrammed IR-transmitter and obtain a fast-mode programming. -
Page 5: How To Program The Ir-Receiver
When entering a bit, the LED will turn of for a moment. When a PW is done and all bits accepted, the LED will flash slowly twice. The IR-receiver will have the same behaviour when it is programmed by the help of an IR- transmitter. ER2AC, ER4AC Page 5. -
Page 6: Programming Memory
The table beneath shows the usercodes and channels: Gewa chan- Usercode nel group 2.3.5 User code and channel - programmed with an IR-remotecontroller A fast mode programming mode is also available. A preprogrammed IR-remote controller can be used. ER2AC, ER4AC Page 6. -
Page 7: Lockcode - Programmed With Buttons
PW to use for relay functions shall start with "1 1 0 0 0". The PW shall be like this: 1 1 0 0 0 X0 Y0 X1 Y1 X2 Y2 X3 Y3 Setting Xn Yn Output function on the relay On/Off Impulse 1 second ER2AC, ER4AC Page 7. -
Page 8: Recycling
Format New Assistant. 3 Productinformation Picomed ER2AC and Picomed ER4AC IR-receivers have 2 or 4 channels controlled by infrared (IR) light. The receivers are developed to control lov-voltage products up to 48 V. They can also control 230 VAC via external relays. They shall be powered with 12-24 VAC/VDC. -
Page 9: Technical Data
3.2 Technical data Type Picomed ER2AC/ER4AC infrared receiver 2/4 channels. Controlled by From an IR remotecontrol. Number of channels 2/4 potential free relays, 0,5 A/48 Volt. Powersupply External powersupply 9-24 VAC/DC. Current consumption 50 mA. Temperature -10 up to + 40 C. - Page 10 (relay etc) which not is not protected with a diode. Brokelandsheia, 4993 Sundebru, Tlf +47 3711 9950 Fax +47 3711 9951 E-mail: firmapost@picomed.no Foretaksnr 962 211 631 MVA...
Need help?
Do you have a question about the ER2AC and is the answer not in the manual?
Questions and answers