Wireless Operation; Wired Operation - Lindy LH700XW Manual

Wireless Operation

Pairing
1. Switch on the Wireless function by pressing and holding the Play Button (2). If a previously paired device is not found within range,
the LH700XWs will automatically go into pairing mode and the LED indicator will alternately flash blue and red.
2. Enable the Bluetooth function on the source device.
3. Navigate to the Bluetooth menu of the device and scan/search for new devices.
4. When the LH700XWs are found, select and follow the on-screen prompts. If a prompt appears for a passkey or pin-code, please use
0000.
5. A notification on the device will confirm that pairing and connection is complete. The LH700XWs will also state "Paired".
Please note: If during wireless use you are suffering from a delay between video and audio playback, this will be due to the Bluetooth
transmitter in your source device.
Re-pairing after connection
1. Enable the Bluetooth function on the source device and ensure the LH700XWs are turned on.
2. If connection is not made automatically, go to the Bluetooth device list on the device and select LH700XW.
3. The device and LH700XWs will now be paired.
Disconnecting
1. To disconnect from the LH700XWs, press and hold the Play button (2) until the LED Indicator is illuminated red and the headphones
state Power Off.
2. Alternatively, to permanently disconnect via the source device, de-activate the Bluetooth function on the device.
Twin-Pairing Mode
The LH700XWs can be paired wirelessly with two separate Bluetooth devices simultaneously for uninterrupted audio switching or for
taking calls on one device while another is used for music.
1. Following the Pairing process above, pair with the first device.
2. While the first device is connected, switch on the pairing mode function again by pressing and holding the Play button (2). While the
LED blinks blue and red, connect the second device by selecting LH700XW in the source device's Bluetooth list.
3. As this will automatically un-pair the first device, re-connect by manually selecting LH700XW in the source devices Bluetooth list. The
headphones do not need to be in pairing mode.
4. Both devices will now be connected to the headphones simultaneously. If the first device's audio is paused, the second device
will continue playing audio. If taking a phone call on the first device, please pause the second device and the headphones will
automatically connect to the first device.
Please note: If the audio quality is poor or a crackling noise can be heard, the Bluetooth connection is weak. Please ensure the device and
LH700XWs are within range of each other with no major obstacles.

Wired Operation

The LH700XWs can also be connected with a wired connection using the 3.5mm audio cable included with the headphones. This will
also prolong the battery life when using active noise cancelling. Please see the Technical Specifications section below for approximate
life-times of the battery.
Wearing the LH700XWs
For a comfortable listening experience, the headband of the headphones can be adjusted easily by sliding upward or downward. The ear
pads can also be rotated.
5