Gateway DC-T20 User Manual page 43

Step 1: Installing the PC Camera Driver
The PC camera driver on the supplied CD-ROM is exclusively for Windows. The PC camera
function provided on this camera is not supported by the Macintosh platform.
Step 2: Connecting the Camera to Your Computer
1. Connect one end of the USB cable to an available USB port on your computer.
2. Connect the other end of the USB cable to the USB connector on the camera.
The camera will automatically power on.
3. The USB MODE menu appears on the LCD monitor.
4. Use the or button to select PC CAMERA and press the
PC CAMERA is displayed on the LCD monitor.
5. Position the camera steadily on top of your computer monitor or use a tripod.
Note:
When using this camera as a PC camera, there is no need to install any batteries into the
camera. The camera will automatically power on when connected to the computer via USB
cable.
Step 3: Running the Software Application (for example: Windows NetMeeting)
To use Windows NetMeeting for videoconferencing:
1. Launch Windows NetMeeting.
(Start==> Programs ==> Accessories ==> Communications ==> NetMeeting)
2. Click the Start Video button to view live video.
3. Click the Place Call button.
4. Type the e-mail address or the network address of the computer that you are calling.
5. Click Call.
The person you are calling must have Windows NetMeeting running and also accept your
call to start the video conference.
IM±Æª©GAT.p65 43
button.
43
92/7/30, ¤W¤È 09:48