Choosing The Language; Setting The Date And The Time - Gateway DC-M42 User Manual

Choosing the Language

When you turn on the camera for the first time, the language
setting screen appears, prompting you to choose a language
for displayed information and the LCD monitor. Follow the
steps below to set the OSD (On-Screen Display) language.
1. Select a language that you prefer by using the
2. Press the OK button to confirm.
The language setting will be retained even if the camera is turned off.

Setting the Date and the Time

The Date/Time screen is presented if/when:
The camera is turned on for the first time.
The camera is turned on after removing the batteries/AC
power adapter or replacing the batteries.
When the date and time setting screen appears, follow the
steps to set the correct date and time. You may skip this
procedure by pressing EXIT.
1. Enter the values of date and time by using
To incraese a value, press the
To decrease a value, press the
2. Press OK after all fields are set.
/ button.
/ button.
button.
button.
25