HydroSure 350010101 Instructions

size:228x153mm
INSTRUCTION
INSTRUCTION
HYDROSURE WATERING
TWO DIAL WATER TIMER
TAP TIMER
MODEL#YL21129
SKU 350010101
TIMER FEATURES
⑩
③
④
⑤
⑦
① Battery compartment & ② Battery compartment
BATTERY COMPARTMENT &

cover
 BATTERY COMPARTMENT COVER.
Slide out the battery compartment ①, and insert 2x
Slide out the battery compartment 
(LR6/AA) 1.5V alkaline batteries.
and insert 2x (LR6/AA) 1.5V alkaline batteries.
WARNING
a. Use only fresh alkaline batteries at the beginning of
 WARNING
the season. DO NOT use rechargeable batteries.
a. Use only fresh alkaline batteries at the beginning of
b. Test the unit by turning the Run Time knob to ON
the season. DO NOT use rechargeable batteries.
position. You should hear the sound of the motor
b. Test the unit by turning the Run Time knob to ON
within 10 seconds. If you do not hear the sound, position. You should hear the sound of the motor
check if the batteries are installed correctly. within 10 seconds. If you do not hear the sound,
check if the batteries are installed correctly.
c. Turn Run Time to OFF position before connecting
c. Turn Run Time to OFF position before connecting
to tap.
to tap.
③ 3/4'' Tap adaptor & ④ Collar ring
 3/4'' TAP ADAPTOR &  COLLAR RING
Turn loose the collar ring ④ until the tap adaptor ③
Turn loose the collar ring  until the tap adaptor
is unlocked, screw the tap adaptor ③on to the tap
is unlocked, screw the tap adaptor 
tight and then lock them tight with the collar ring ④.
tight and then lock them tight with the collar ring
WARNING
DO NOT use spanners or pliers to avoid damage to the
 WARNING
timer.
DO NOT use spanners or pliers to avoid damage to the
timer.
⑤Frequency knob
FREQUENCY KNOB

Determine how often you will water, from 1 hour to
Determine how often you will water, from 1 hour to
1 week.
1 week.
⑥Run Time knob
 RUN TIME KNOB
Choose how long to water, from 1 minute to 120
Choose how long to water, from 1 minute to 120
minutes.
⑨
minutes.
⑦Male snap-on connector
 MALE SNAP-ON CONNECTOR
⑥
Connect hose attachment to the male snap-on
Connect hose attachment to the male snap-on
connector ⑦ at the bottom of the timer.
connector
⑧
⑧ Delay button
DELAY BUTTON

To delay the start watering time， press Delay button
To delay the start watering time, press Delay button
for more than 3 secs until led is constantly ON, then
for more than 3 seconds until led is constantly ON, then
①
each press of delay button means 1 hour delay of
each press of delay button means 1 hour delay of
the next start watering time. (EXAMPLE 3)
the next start watering time. （EXAMPLE 3)
 LED INDICATOR
⑨ Led indicator
Led indicator flashes once every 4 seconds.
②
Led indicator flashes once every 4 seconds.
WARNING
 WARNING
Replace with new batteries if led indicator flashes
Replace with new batteries if led indicator flashes
quickly or on steady.
quickly or on steady.
,
⑩ Filter
 FILTER
Filter traps dirt particles and prolong life of timer.
Filter traps dirt particles and prolong life of timer.
WARNING
Clean filter regularly and replace if worn.
 WARNING
Clean filter regularly.
PROGRAM TIMER
PROGRAM TIMER
1. Set Frequency (determine how often you will water,
1. Set Frequency (determine how often you will water,
2. Set Run Time (determine how long to water, from 1
2. Set Run Time (determine how long to water, from
NOTE: The first watering will start X hours later, X is
the set Frequency hours.
NOTE: The first watering will start X hours later, X is

the set Frequency hours.
on to the tap
WARNING
 .
Frequency should always be longer than Run Time.
 WARNING
(Example: Frequency=1H, Run Time=90 minutes, is
Frequency should always be longer than Run Time.
NOT a valid setting.)
(Example: Frequency=1H, Run Time=90 minutes, is
NOT a valid setting.)
 at the bottom of the timer.
from 1 hour to 1 week.)
from 1 hour to 1 week.)
minute to 120 minutes.)
1 minute to 120 minutes.)