Advertisement
Quick Links
Advertisement
Related Manuals for Amazon B005PJJ89U
Summary of Contents for Amazon B005PJJ89U
- Page 1 B005PJJ89U...
- Page 2 Turns gauge on/sets choices Set button Increases/decreases setting options Up/Down buttons Displays selections/readings LCD display Turns LED flashlight on/off Flashlight power button Releases air/reads tire pressure Nozzle...
- Page 3 Instruction Manual AmazonBasics Programmable Digital Tire Gauge Features • Program your vehicle’s tire pressure volume • Fine tune tire pressure with air-bleed function • Reach awkward angles with the swivel head • Easy-to-read, extra large backlight display • Built-in white LED flashlight on tip...
- Page 4 To use: Measuring pressure 1. Press Set. The display lights and “0.0” appears. The default unit of measure is PSI. 2. Remove the cap from your tire valve. 3. Push and hold the nozzle on the gauge against the valve stem until the pressure reading is displayed and locked.
- Page 5 Over range error If your tire pressure is more than 99.5psi/ 6.90bar, the display will show an “E.” Setting a target for tire pressure level Note: The target numbers you set are reminders of your vehicle manufacturer’s suggested tire pressure levels. They cannot be used to test for or indicate actual pressure in tires.
- Page 6 2. Press Set again and hold for 3 seconds. The unit “PSI” or “BAR” appears and blinks. Press or to switch between PSI and BAR. Then, press Set to confirm your selection. The icon indicating front or rear tire lights and blinks. 3.
- Page 7 4. Press or to change the target number you want, then press Set to confirm. The icon for the next tire is displayed. 5. Press or to to select your target number, then press Set to confirm.
- Page 8 6. Your target numbers for both tires light for about 2 seconds, then the display returns to “0.0”. Measuring pressure with a preset target 1. Press Set. The display lights and “0.0” appears.
- Page 9 2. Pressor to choose between the front and rear tires. 3. Push and hold the nozzle on the gauge against the valve stem until the pressure reading is displayed and locked. 4. Remove the gauge from the valve stem. The current pressure reading appears on the top of the display and your target reading appears on the bottom for 10 seconds.
- Page 10 5. When the display returns to “0.0”, repeat steps for the other tires. 6. After your final reading the display returns to “0.0” and turns off after 10 seconds. Using the white LED flashlight Press and hold the power button to turn on the light. Release the power button to turn off the light.
- Page 11 However, there is no guarantee that interference will not occur in a particular installation. © 2011 Amazon.com, Inc. or its affiliates. All Rights reserved. Amazon and the AmazonBasics logo are trademarks of Amazon.com, Inc. or its affiliates.
- Page 12 11-1327...
Need help?
Do you have a question about the B005PJJ89U and is the answer not in the manual?
Questions and answers