Page 1
Product Guide 012-16706A / / /contr /control.Node ol.Node PS-3232 What' What's included s included Device f vice featur eatures es • //control.Node USB Port USB Port • USB cable Use this port to charge the battery by connecting to a USB charger using the included USB cable.
Page 2
The //control.Node outputs are controlled with blocks provided in the Sensor (PS-3222), Line Follower (PS-3320), or Range Finder Code tool in SPARKvue or PASCO Capstone. Sensors can be used to (PS-3321). control devices connected to the outputs using the value of value of block in 4.
Page 3
Step 2: Get the softwar Step 2: Get the software e 4. Select the //control.Node that matches its device ID. You can use the //control.Node with SPARKvue or PASCO Capstone software. If you're not sure which app to use, visit pasco.com/products/guides/software-comparison pasco.com/products/guides/software-comparison for help.
Page 4
Need more help? Our knowledgeable and friendly Technical Support To import a program from the PASCO Code Library: staff is ready to provide assistance with this or any other PASCO 1. At the top right corner of the Code tool, click the PASCO Code product. Library...